Electric seats on E86

I

IceMan87

Member
 Italy
Hi guys,
I have a couple of M electric seats from my ex 2.5 roadster and i would like to mount them on the coupe.
I know that the coupe isn't wired.
I don't know how to connect the new cable (that i have just prepared) to the fuse box
On various forum I have found only the instruction for the heating system and nothing for the simple electric movement.

Can somebody help me?

Thanks
 
AFAIK all E86s had electric seat adjustment with memory, so it should be a straight swap. :thumbsup:
 
Mmh, maybe the UK E86s ... I remember that I've found something about that on this forum.
My car is Italian and I've verified that it doesn't work simply by plugging the connector :(
 
you can make a loom easy enough - the seats have all the ECUs to work all the motors in harmony, i've wired electric seats into my non-electric pre wired E46 and they work perfectly with just a positive wire from the cigarette lighter and a ground wire on the chassis.
 
Yes, that's the second possibility I will follow if I don't find the solution for the fuse box.
But for the K-bus, how did you do it?
 
IceMan87 said:
Yes, that's the second possibility I will follow if I don't find the solution for the fuse box.
But for the K-bus, how did you do it?
Click to expand...

No K-bus, i just have the electric functions - the memory would be of no use to me as i am the only driver
 
I would like to have the memory function. :(
Do you think that I can take the K-bus from another position/element to obtain the same function or it isn't possible?
 
Got it!
There's a connector on the right of the fuse box. This connector goes to the seats fuse!
PIN 5 for the passenger
PIN 10 for the driver (left hand drive)
I don't know where I connect the K-BUS but the memories work without any problems.
 
You must log in or register to reply here.
Back
Top Bottom