WANTED E89 M Sport Alloys

[Adam. Eustace]

Hi everyone,

I’m looking for a replacement rear alloy wheel for my 2010 BMW Z4 E89 sDrive23i M Sport.

My first preference is a genuine 19-inch Style 326M rear wheel with the following specifications:

• 9J x 19
• ET40
• BMW part number: 36117842136

It must be straight and free from cracks or previous welds, as my current rear wheel has already been welded several times and has cracked again.

Alternatively, I would consider a complete set of genuine 18-inch Style 325 M Sport wheels, preferably staggered and suitable for the E89. Wheels with good non-run-flat tyres would also be considered.

I’m based near Burntwood in the West Midlands but would be willing to travel a reasonable distance for the right wheel or set.

Please let me know what you have, including the condition, repair history, location and price. Photos of the inside and outside of the wheels would be appreciated.

Thanks,

 

[B21]

326M rears without welds/cracks one off are rare beasts..primarily because 326M rear crack very often!

They always crack again unless an aerospace welding treatment is used..

18" non run flats or going up a profile on 19" non runflat are your best choices

 

[Matt.rowley.1990]

Could do what I did and get some 5 series 351M wheels. They’re staggered and visually very similar to the 326Ms. Given they’ve got a much greater load bearing capacity, they’re far less likely to crack.