Sportbilly
New member
I don't suppose you're able to do this on the E85 Z4?
E89 Cruise Control Fitting
- Thread starter AnubisZed
- Start date
OK, I'm now able to start this back up again.
Following on from what Boris said the other night, regarding easing of certain restrictions, I am now in full flow to re-book previous appointments and fit in new ones when and where I can. Please bear with me though while I actually sort dates out as I do have a backlog.
I’m still going to undertake fittings on the same basis as before, 3 time slots on a Saturday and then work from there.
Right, now for the boring part!...
As for your safety I have an area for you to sit (but I suggest bringing something to read etc as the local Costa/KFC/Burger King etc are still not allowing people inside yet), but I must insist that you come alone please.
I’ll be wearing gloves and a facemask during the retrofit and all the items that I supply will be wiped down with alcohol wipes prior to fitting. I’ll then be working alone in your Z while fitting and maintain a 2 meter safe distance at all times. I hope you all understand.
I think that about covers everything for now.
Thank you and best regards,
Dave :thumbsup:
Following on from what Boris said the other night, regarding easing of certain restrictions, I am now in full flow to re-book previous appointments and fit in new ones when and where I can. Please bear with me though while I actually sort dates out as I do have a backlog.
I’m still going to undertake fittings on the same basis as before, 3 time slots on a Saturday and then work from there.
Right, now for the boring part!...
As for your safety I have an area for you to sit (but I suggest bringing something to read etc as the local Costa/KFC/Burger King etc are still not allowing people inside yet), but I must insist that you come alone please.
I’ll be wearing gloves and a facemask during the retrofit and all the items that I supply will be wiped down with alcohol wipes prior to fitting. I’ll then be working alone in your Z while fitting and maintain a 2 meter safe distance at all times. I hope you all understand.
I think that about covers everything for now.
Thank you and best regards,
Dave :thumbsup:
OK so I'm keeping myself safe and customers as well by wearing a facemask and gloves while undertaking cruise fittings 8) :thumbsup: :driving:
Next availability is now into August (15th & 29th) then we are looking next at September :thumbsup:
Next availability is now into August (15th & 29th) then we are looking next at September :thumbsup:
Attachments
Hi Dave,
I would love this conversion, and I'm looking to turn it into a weekend trip, would be coming down from M/cr. Whereabouts are you and are there any nice towns nearby you'd recommend? Would be looking to get a B&B and have a look around the area, Market Rasen / Tealby area sounds nice (lockdown permitting
).
I would love this conversion, and I'm looking to turn it into a weekend trip, would be coming down from M/cr. Whereabouts are you and are there any nice towns nearby you'd recommend? Would be looking to get a B&B and have a look around the area, Market Rasen / Tealby area sounds nice (lockdown permitting
).PM sent :thumbsup:Stash36 said:Hi Dave,
I would love this conversion, and I'm looking to turn it into a weekend trip, would be coming down from M/cr. Whereabouts are you and are there any nice towns nearby you'd recommend? Would be looking to get a B&B and have a look around the area, Market Rasen / Tealby area sounds nice (lockdown permitting
David Farndon
New member
Hi, I would like you to retro fit my Z4 with Cruise control. I have the new stalk assembly and have just ordered the lower trim part. So Be happy for you to fit and code them.
My tel No is 07810 874 135 and my e-mail is [email protected]
Could you give me some idea of time when you can do this please
Look forward to hearing from you.
Many thanks
David
My tel No is 07810 874 135 and my e-mail is [email protected]
Could you give me some idea of time when you can do this please
Look forward to hearing from you.
Many thanks
David
Thanks for the quick response. Whilst I consider it 'essential'....I'm not sure UK Gov would 
Totally understand at the mo.
Being new to this forum, I can't PM yet....which is rather annoying.
I've watched the videos and reckon I could have a go (I do all my own car/bike servicing and am pretty good with a computer).
I have an OBD to USB cable (from my Subaru and VAG days) already so I'm going to download the software and see if they'll speak.
Would still be good to hear from you with any advice.
Thanks again, John.
Totally understand at the mo.Being new to this forum, I can't PM yet....which is rather annoying.
I've watched the videos and reckon I could have a go (I do all my own car/bike servicing and am pretty good with a computer).
I have an OBD to USB cable (from my Subaru and VAG days) already so I'm going to download the software and see if they'll speak.
Would still be good to hear from you with any advice.
Thanks again, John.
John35is said:Thanks for the quick response. Whilst I consider it 'essential'....I'm not sure UK Gov would
Being new to this forum, I can't PM yet....which is rather annoying.
I've watched the videos and reckon I could have a go (I do all my own car/bike servicing and am pretty good with a computer).
I have an OBD to USB cable (from my Subaru and VAG days) already so I'm going to download the software and see if they'll speak.
Would still be good to hear from you with any advice.
Thanks again, John.
But sometimes its just not worth re inventing the wheel if you dont have to!
:!: Please note - If you want me to install Cruise for you then I'm very happy to do that, I don't ask for money upfront but what I do ask for is a commitment from you to confirm a date that I offer. If you do not reply within the second time of me asking this date will be cancelled and offered to someone else. I think it's only common decency to reply to me if I'm doing something for you, and if that's not possible then goodbye! :thumbsdown: End of rant.
Hi Dave,Day2k said:
Yes I still do it from time to time :thumbsup:
Cost is £130* all in (supply, fit and code), the process takes around 45 minutes and I only work from home, which is Grantham, Lincolnshire. As I have a full time job as well it would be a Saturday when I'm available and that won't be until into the new year now.
As you're new I don't think you can send me a PM yet, so you can contact me directly on anubis4120 @ googlemail. com (< just miss the spaces out)
*£130 for standard, if you have a heated steering wheel then it would be £180 due to expensive lower cowl.