DSC and Brake light post front disc and pad change

[clang0203]

Hi, managed to change discs, pads and callipers on both front wheels. Bled the system but ono starting both the DSC light and brake light are both remaining lit. I took the car for a test drive and it is driving like it should no more rattling, the lights remained on though, I checked the brake fluid which was low, refilled but lights still remain. do I need to reset these or should they have gone out? any ideas please?

 

[warmasice]

How low did the brake fluid get? I wonder if air got into the ABS unit, in which case the solenoids need to be cycled.

Alternatively, hook up a code reader as it could be a number of different sensors.

 

[clang0203]

It got pretty low, but there was always some in the reservoir. How do you cycle solenoids?

 

[clang0203]

Forgot to mention when changing the drivers side there is no brake sensor cable, should there be one the same as the NS? Could it be previous owner had removed and lights reset?

 

[Smartbear]

Forgot to mention when changing the drivers side there is no brake sensor cable, should there be one the same as the NS? Could it be previous owner had removed and lights reset?

One sensor on the front, another on the rear. You need software to purge the solonoids
Rob