Clutch Delay Valve

[TrainmanDaz]

Finally got round to doing this mod,after owning the car nearly 8 years, really simple.
I'm no expert, I clamped off the hydraulic line and removed the delay valve and reconnected the hydraulic line from where the delay valve came from. No fluid seeped out although I did bleed the clutch suspect I could have gotten away with not doing it. The bleed nipple is really awkward to get to specially with the car on stands. What a drastic difference changing from first to second, as well as going back into first again.

 

[lucasxdiniz]

I've done the same a week or so ago, but I didn't bother bleeding the clutch. I wish I had done it to my previous Z4 - much more pleasurable to drive.

 

[Mr Tidy]

Yes, it made a huge difference to my E46 325ti - thankfully my E86 already had it done.

Now I just need to get it done to my E90!

 

[Kit Kat]

Your post has prompted me to do mine today. Think I will drill it out rather than remove altogether though.
Great post cheers

 

[TrainmanDaz]

Rather than drilling, the Hydraulic line will just attach in place of the CDV plenty of slack, dont think it will make much difference although I'm no expert.

 

[Yorkie Z]

Your post has prompted me to do mine today. Think I will drill it out rather than remove altogether though.
Great post cheers

Don’t waste your time. Just remove it and stick it in the bin.

 

[Kit Kat]

All done removed as suggested