Yes, needs extra bits, it's better than the GS one and the Evolve one. Box itself needs no mods, but you'll need the snorkel .. or not, that's up to you.. but you'll need different boots and new clamps, you'll need to source the air filter, and iat probe.
You'll need to either extend your current breather or buy the CSL one, and you'll need to either fabricate one of the hoses or by the CSL part.
Total from memory is about 300 US If you include the filter, but snorkel excluded. You'll need a soldering iron and some heatshrink and some heat cover hose for the iat probe that you will wire up.
Hope that helps.. the Karbonious box is by FAR the better box unless you go with authentic BMW Motorsport.
I could probably chase up a parts list if I dig around in my files long enough. The install itself is pretty much piss easy. You'll need to re locate the oil stick.
You will LOVE it, it's the best mod for our cars.. period.
Oh, you'll need the proper BMW CSL iat probe, not the other ones that are available. The CSL one slots straight into the box. Oh and that hose I talked about fabricating is about 75US, so I'd suggest you fabricate it with some fuel line... Or not.. once again, up to you.
Don't get it fitted, do it yourself and learn something in the process.
There are lots of guides around, these days even z4m specific.
Lucky for you I am sitting in Venice waiting for our little baby to wake up from midday snooze so we can go sight seeing..
Parts list..
CSL Crank Case Vent Hose (11157833649) - £21.20
CSL Airbox Air Shut Off Valve (11617833647) - £62.27 (fabbed this together myself with fuel line. Perfect)
6 x Clamps (59 - 66mm) (07129952125) £6.98
Karbonius Snorkel - £300
OEM CSL filter - £93 or so...
CSL IAT Sensor (13621739510) - £31.84 - Purchasefrom BMW
Plus postage for all that crap. Those clamps you can probably replace with shitty plumbers ones, but anyhows, there's the list.
have fun. The flap in the original OEM snorkel is not required, it's for noise control, and unless you have access to a proper CSL dme to clone or to buy, it ain't gonna work anyhows.
You'll need to either extend your current breather or buy the CSL one, and you'll need to either fabricate one of the hoses or by the CSL part.
Total from memory is about 300 US If you include the filter, but snorkel excluded. You'll need a soldering iron and some heatshrink and some heat cover hose for the iat probe that you will wire up.
Hope that helps.. the Karbonious box is by FAR the better box unless you go with authentic BMW Motorsport.
I could probably chase up a parts list if I dig around in my files long enough. The install itself is pretty much piss easy. You'll need to re locate the oil stick.
You will LOVE it, it's the best mod for our cars.. period.
Oh, you'll need the proper BMW CSL iat probe, not the other ones that are available. The CSL one slots straight into the box. Oh and that hose I talked about fabricating is about 75US, so I'd suggest you fabricate it with some fuel line... Or not.. once again, up to you.
Don't get it fitted, do it yourself and learn something in the process.

Lucky for you I am sitting in Venice waiting for our little baby to wake up from midday snooze so we can go sight seeing..
Parts list..
CSL Crank Case Vent Hose (11157833649) - £21.20
CSL Airbox Air Shut Off Valve (11617833647) - £62.27 (fabbed this together myself with fuel line. Perfect)
6 x Clamps (59 - 66mm) (07129952125) £6.98
Karbonius Snorkel - £300
OEM CSL filter - £93 or so...
CSL IAT Sensor (13621739510) - £31.84 - Purchasefrom BMW
Plus postage for all that crap. Those clamps you can probably replace with shitty plumbers ones, but anyhows, there's the list.
