2005 Z4 E85

[Rldee007]

Looks like muscle car with the mods.
Once again, great work!

 

[Dave 2 dogs]

Thanks
Mr ward
I put some vents in my e89 recently…
Just interested to see a closer picture to see how your ones turn out. Have you left it open underneath? I put trays and drains in .

 

[Mr Ward]

Just interested to see a closer picture to see how your ones turn out.

The underside of the bonnet is still a work in progress. At the moment all construction work on the underside is yet to start. So, everything I have done to get the vents and bonnet locks into it is still highly visible with all the raw cuts and parts taken away from the structure glaring at you once the bonnet is opened. I will get onto it eventually to tidy it up and make it look pretty. The vents I positioned in such a way that one side above the engine were closed and solid so no water could drop onto the engine through them. The front and one side are open, the position of the open vents lets water drip down just past the sides of the engine and any electrical components. Took a lot of measuring and plenty of cardboard mock-ups to get the positioning correct. I plan to put something like a door seal or some form of rubber strip around all the exposed parts of metal that were cut away to get the bonnet catches into the bonnet. The bonnet catch under the bonnet that locks the bonnet in place snapped off when I tried to remove it, so I will have to cut a hole into the bottom of the bonnet to remove the snapped part inside. 85% of the bonnet structure on the underside middle section has been removed to get the bonnet vents and bonnet catches into the bonnet.

 

[Mr Ward]

Now …. Can you post some more pictures of the bonnet please

As requested.

 

[Jembo]

Saved a Z, that’s worth everything

Black & yellow is exceptionally brave - but suggest there is too much black - a solution could be to add a rakish yellow on the front to balance?

Otherwise deffo with you on the de-French fry look, did that on my previous 3.0

Good effort fella, now just enjoy

 

[Dave 2 dogs]

Like what you did there MR WARD
I went for a different approach

 

[Mr Ward]

but suggest there is too much black

I agree with you on the black amount, I have been toying with a few ideas to possibly break it up.

1) Yellow Alloy Rim protectors.
2) Yellow mirrors and yellow mirror mounts on the doors.
3) Inside the original alloys there are some flat ridges in-between the spokes. I have been thinking of spraying the ridges yellow, so it continues to break up the black. Plus, when revolving it would create a continuous yellow line inside the wheels.
4) Spray the wheels a metallic sliver so there is less black.
5) I have a plan for the centre of the bonnet to break up the black. I am looking for an airbrush artist to spray a picture of my recently deceased border collie in the middle of the bonnet. I have the image I want in the middle of the bonnet just need a dam good artist to spray it on for me. I will drop a few images of what I am thinking of doing after I have finished editing them in photoshop.

 

[Mr Ward]

The image of the Border collie i am looking at having her sprayed on the middle of the bonnet in-between the air vents. The original image of my border collie is a lot clearer with a lot more detail in it.

 

[Mr Ward]

I went for a different approach

That does look nice and not a bad job. I did think of going down the route of buying some premade vents but then my artistic side kicked in and that was the end of that thought.

 

[Zedebee]

I am looking for an airbrush artist to spray a picture of my recently deceased border collie in the middle of the bonnet.

I’m sad for you, BCs are the best. We lost ours at the beginning of the year and realised we couldn’t do without one, so . . .

 

[enuff_zed]

Look what appeared on my drive this morning.
All the way from Stafford to Attleborough in less than 3 hours and an average of 26mpg.

Having now seen this car in the flesh, and accepting that it is still a work in progress I have to say it's far better than anything I could have achieved. Look forward to hearing more on the improvements and hope the car sticks around for a long while yet.

Yesterday I had Jingle here in his 3.0si-engined white one. Jamie, I'm sorry mate but yours merely whispers compared to this little 4-pot.

 

[Mr Ward]

Jamie, I'm sorry mate but yours merely whispers compared to this little 4-pot.

Its loud and its proud, she put a smile on my face hearing the roar as I was hoofing it down some stretches of motorway to yours. I would rather listen to the tune of the exhaust than have the stereo on drowning out the nice notes.

Thanks for giving me a shout about the various parts. If I find anything else that I need I will shout to see if you have them.