108 DIY refurb

D

deka

Senior member
Finally completed the refurb of 108's after following the guides on here,,, wanted to keep them as stock as possible

I wont bore you with all of the pics but here is a selection.

Stripping off the old lacquer
001-3.jpg

stripped cleaned rim now ready for a polish
004-5.jpg

the star in primer ready for the final finish
003-2.jpg

the outer edge after polishing,,,, shame that the clear lacquer will dull this finish
004-4.jpg

Finished article just letting them bake a bit in the sun before tightening the bolts.
001-2.jpg
 
Looks like great job you've done on them,brave guy i would'nt have the bottle to attempt it. :thumbsup:
 
Good effort :)

May I suggest a single bead of silicone sealer around the inside joint once bolted and torqued up. Stops much of the water getting in from the inside.
 
You must log in or register to reply here.
Back
Top Bottom