Recent content by helloitsme

Hello everybody, I have a problem with my xenons not auto-leveling. I already checked both level sensors and they seem to be fine. I also checked the wiring for the front sensor through the wheel well and couldn’t find any visible damage. I measured the front sensor wiring with a multimeter —...

Hello, does anybody with an E85 pre-facelift and xenons confirm that this is the OEM look? I mean, the colors of the lights… I read that for xenons it was 4300K, but the parking light 5W5 is really yellow. Is it supposed to be like that? Also, is the inner H7 the classic yellow one as well...

Thanks, i had a problem to find ISTA download link before, but i will try to look.. INPA have the lwr reading too, but its poor or maybe i dont understand it well.. but i tried to look for some commands to activate the motors moving, through inpa, to confirm if the headlights motors work with...

Hello, Thanks for helping.. i didnt took the picture of ncs dummy, but in my case it was in ALSZ module, and theres whole section of settings for LWR, in my case this section was with light green background. Theres i think two important settings, LECHWEITENREG_AUTOM, which is automatic vertical...

Can anybody tell me if the smaller 4-pin connector on the headlight or harness (with blue, green, yellow, and white wires) is for the leveling motors? I mean, there’s one large 8-pin connector, and then there’s this smaller one

Yes i know, but the inpa error says “front load sensor”.. but i think sensors are not the problem, but compatibility with headlights..

Hello, I recently discovered that my pre-facelift E85 (2003) was originally equipped with bi-xenon headlights. However, the current aftermarket Sonar headlights installed on the car are halogen. I’m getting an error code in INPA every time I turn on the headlights without the engine running...

Hello, My rear window defroster isn’t working. I started by checking fuses 20 and 25, and they’re both fine. Then I measured the circuit with an ohmmeter at the window connector — continuity is okay, so the window element isn’t broken. However, when I tried to measure voltage on the tab (the...

Hello, All auto dim rear view mirrors on my 2003 e85 are faulty. I changed the interior one for e87 mirror and its working great. Now, im looking for side mirrors, which is little bit trickier..Does anyone know which models had the same dim mirrors as e85, so i could swap them? Ive read that...

Quick update, After i changed battery on my main key fob, the buttons doesnt work at all.. Im pretty sure, i didnt damaged anything and soldered it fine.. I can turn engine on, but buttons wont work. Ive tried to resync them several times, but it doesnt lock / unlock as supposed after pushing...

Thank you for the photos!! Now i dissambled the key and will solder new battery. I will post the result.

Thanks for all the help & replies! I mean, the cap itself didnt look like aftermarket for me at first, just when i looked on the other looms on internet, i didnt see that cap.. But like i said everything is working, with lock & buttons i can going up & down, stop in middle then continue and...

Hello, so after many struggles with roof (faulty pump then faulty module) its finally working like it should. The last thing thats not working correctly its comfort mode. The roof starts to going down or up, but after while its stops and red light start flashing.. Sometimes i need to push key...

Hello, My airbag light keeps coming back, whenever somebody sits on passenger seat. Its the code 9913 SBE1. Occupancy seat mat sensor. My question is, should i buy bypass / make DIY diode & resistor bypass or should i code it with NCS? Anyone coded it before on e85? Its really just about...

I think you are right about faulty module. Ive checked the wires and i didnt see any broken. But i found weird thing. When i have my engine on and turn the lights on, the roof works, but just once (it doesnt matter, if i want to open or close it). When i turn my lights off and back on again, its...