Recent content by ColinP

I have a Z4 E89 Carbon rear diffuser for sale I have had it for about 8 months but never got around to getting a twin box & fitting it I am looking for about £250 I live in the midlands if anyone would like to collect it or I can post at cost! its the same as in the link bellow...

Old photo of Seats! New seats fitted! I was going to get the seat re covered in red leather, but I don't know now, I might see what I think for a couple of weeks! They were easy to fit, I fitted a by-pass for the seat occupancy sensor & a seat belt sensor by-pass, so the air-bag will...

Hi all, I have just got hold of a good pair ooh er, of M sport seats, I have looked at posts and I am now more confused than I was to stat with!!!! On pre-face lift 2003 do I just fit a flee bay BYPASS FOR BMW PASSENGER OCCUPANCY SEAT MAT SENSOR AIRBAG EMULATOR FIX UPTO 2005 and that's it...

I had the trik or treaters round the other day and it seems a big bag of haribos didn't do it for them as on friday i notised a big scratch on my boot lid. A rear spoiler like the one on http://www.z4-forum.com/forum/viewtopic.php?f=6&t=43132 might cover most the scratch but i don't know if i...

I changed the steering wheel last week to a multi function one, I have fitted the airbag back on but it does not seem to fit secure and is all wobbly have tried to push it back home pushing screwdriver in the holes on the back of the wheel and hitting it like a hitty thing but to no avail it's...

Has anyone changed there brake pipes? as my car has failed it's MOT today because of the rears been corroded! I think that it should be fairly easy to change to copper pipes but does anyone know otherwise?

Hi all, i am in the process of retrofitting a factory sat nav using a X3 wire loom. Reading feeds i have read instruct you to connect the black/White wire to the speedometer, cable pin 6, but i have removed the clocks and i don't know what wire cable pin 6 is or what colour wire i am supposed to...

I have just got a new amplifier to install in the boot and have spent what feels like the last week looking on the forum for the location of a remote on/off wire to turn the amp on! Feeds i have read say that if i use the wire from the back of the stereo it will mute the system and the world...

This is how i removed the bushes and installed Powerflex bushes. Things you need other than a tool kit are some 10mm high tensile all thread, nuts to suit, steel washers and steel cup to pull bush into. i milled mine but there is no need. Drive car onto some wood so you are able to...

1. Remove rear mounting bushes 2. Install Powerflex bushes 3. Remove rear rollbar bushes 4. Install Powerflex bushes 5. Remove rear shocks 6. Install Koni rear shocks Took all day to remove and install bushes i did not get round to do shocks, but i did think that the shocks would be an easy job...

Thinking of fitting Stainless Steel Race Exhaust Manifolds and full exhaust system, any one know of any problems with changing from standard manifolds?

Hi all, as no one seems to be able to let me know how to get to the fuel filler flap actuator :( (when i find out how i will post info) i thought i would post a some pics of my car. :driving: Door module now working fine. drivers door getting a bit hard to get in to when been i sun (yes...

Can anyone let me know how to get to the Filler flap actuator, i have read lots of faults on the forum about the flap lock but nobody has reported how to actually get to the actuator! i can hear a noise coming from it when locking/unlocking but no pin is coming out. I don't know if the pin has...

Hi removed my pasenger seat today to clean under it. Now the air bag light is on!! How can i stop light??????????

Hi all, i have just purchased a 2.5 2003 with 64k on the clock, when i took it for a test drive i was told it would need new key batteries (yes i know it's not that simple) so i have been to BM and apart from telling me it's £110 plus for a new key, they tested the car (diagnosis price £90) and...