0l0dom0l0's latest activity
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Knock knock.... I, like most S54 owners, was aware of the potential rod bearing issues. I was really enjoying the car but at about 113k...
-
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Feeling a bit flat today.... So I'd picked up a puncture - and realised on the morning my friend had turned up to go for a Sunday...
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Light at the end of the exhaust... At this point I was starting to become a little overwhelmed, the exhaust was something that I knew...
-
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.I wish I'd never started... With the cosmetics now in reasonable order, my eyes were continually drawn to the poor state of the wheels...
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Christmas came early..... So with the cleaning out the way, the next thing I wanted to address was the christmas tree dash. When...
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.The roof.... The roof was actually working which was a nice touch, but it was imbedded with algae and let the car down. Most people say...
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Many hours later....
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.Cleaning... Inspired by my success with the AC, but equally embarrassed by the state of the car, I couldn't stand looking at it anymore...
-
00l0dom0l0 replied to the thread Reviving a Neglected Z4MR.On the drive home I was immediately disappointed, the car was handling like a bag of s***. The steering wheel was at about 2 oclock and...
-
0I've been around on the forum for a while but never properly introduced myself - so here I go - complete with my story of how I became...
-
00l0dom0l0 replied to the thread BMW Z4M S54 - slight hesitation/stutter when you press the accelerator from idle..Send off your vanos accumulator for a gas recharge too. Will be low on gas and not holding enough pressure to help sudden/ sharp...
-
00l0dom0l0 replied to the thread Help with the Tie Rods Part# Z4M.Lemforder part numbers used on my Z4M were: 1800302 2142401
-
00l0dom0l0 replied to the thread Bilstein B6 and stock washer?.Yes it is still used. Pay notice to which way up the washers are, as they are cupped.
-
00l0dom0l0 replied to the thread Cruise Control question.https://z4-forum.com/threads/fuse-box-wiring-or-connector-11007-pinout-z4m.156607/ Recently did this the non intrusive way, not a...
