What did you do to your Z4M today?

Changing dial colour from black to yellow and dial surrounds from silver to black .

1.jpg2.jpg3.jpg4.jpg5.jpg
 
New gas struts to to the boot and and a general clean.
Getting ready for brand new discs and pads all round going on tomorrow.
 

Attachments

  • image.jpg
    image.jpg
    108.3 KB · Views: 640
  • image.jpg
    image.jpg
    179.1 KB · Views: 640
1536Z4 said:
Changing dial colour from black to yellow and dial surrounds from silver to black .

1.jpg2.jpg3.jpg4.jpg5.jpg
That's brave I would 100% snap something! Pics once completed? 8)
 
RedUn said:
That's brave I would 100% snap something! Pics once completed?

This is my second time doing this so not so bad .There is a very good video on you tube which I use https://youtu.be/lbj2tSZvzI0?si=SFPQCkQ9QRTowARH

Will post photos soon :thumbsup:
 
Not so much what I’ve done today but what I probably might be doing, wrong thread I guess but what the hell :evil: (won’t start a new thread as think quite a few of these already now)

IMG_6447.jpeg
 
AndyBeech said:
Not so much what I’ve done today but what I probably might be doing, wrong thread I guess but what the hell :evil: (won’t start a new thread as think quite a few of these already now)

IMG_6447.jpeg
Good choice :evil: :evil: :evil:
 
RedUn said:
AndyBeech said:
Not so much what I’ve done today but what I probably might be doing, wrong thread I guess but what the hell :evil: (won’t start a new thread as think quite a few of these already now)

IMG_6447.jpeg
Good choice :evil: :evil: :evil:

Cheers mate :evil: It's all you guys fitting them now I can't go without any longer :lol:
I might tap you up for some help when it comes to fitting if that's ok, seems fairly straightforward, just the dipstick 'bending' which not too sure about. Was going to get the CSL dipstick but not paying over £100 in parts just for that :headbang:

Those chain plier things you recommended for the airbox clips work a treat by the way, much easier than anything I've used previously when I had the aribox off for some cleaning the other week. :thumbsup:
 
RedUn said:
The bulbs arrived tonight so found a bit of time to get them in and short test drive.

The bulbs as they come...D2S fitting for the E85/6

They look like quite an improvement. :thumbsup:

I bought the previous generation Osram Xenarc D2S Cool Blue bulbs for my car in 2020 and have been really pleased with them.

Yesterday I took the tint film off my rear window, but posted that here:- https://z4-forum.com/forum/viewtopic.php?t=93757&start=15150

Rather than post everything twice I'll stick to that thread and just post M specific things here!
 
companycardriver said:
Finished fitting the carbon leather dash parts I bought from Simon 3.2M in December.

Lovely!

The carbon leather was standard on Ms - who on earth thought brushed aluminium looked better? :(
 
Mr Tidy said:
companycardriver said:
Finished fitting the carbon leather dash parts I bought from Simon 3.2M in December.

Lovely!

The carbon leather was standard on Ms - who on earth thought brushed aluminium looked better? :(

Ultimate flimper spec
 
AndyBeech said:
RedUn said:
AndyBeech said:
Not so much what I’ve done today but what I probably might be doing, wrong thread I guess but what the hell :evil: (won’t start a new thread as think quite a few of these already now)

IMG_6447.jpeg
Good choice :evil: :evil: :evil:

Cheers mate :evil: It's all you guys fitting them now I can't go without any longer :lol:
I might tap you up for some help when it comes to fitting if that's ok, seems fairly straightforward, just the dipstick 'bending' which not too sure about. Was going to get the CSL dipstick but not paying over £100 in parts just for that :headbang:

Those chain plier things you recommended for the airbox clips work a treat by the way, much easier than anything I've used previously when I had the aribox off for some cleaning the other week. :thumbsup:
:lol: it's addictive! Best mod on the S54 bar none, the noise is gorgeous and the mid range after is so much better!

Shout if you need any tops I've had mine on and off several times, do the thermal insulation while your at it :thumbsup:

Dipstick I just rotated the OEM one out the way and clipped it up behind one of the chassis braces, near enough and can still check the oil easily, let me know if you want pics :thumbsup:
 
D.Bryce said:
Fitted new powerflex bushes to the engine gearbox and lower control arms in preparation for some trackdays.

IMG_4290.jpegIMG_4291.jpegIMG_4288.jpegIMG_4297.jpeg
Looks mega! Any noticeable nvh from those?
 
RedUn said:
AndyBeech said:
RedUn said:
Good choice :evil: :evil: :evil:

Cheers mate :evil: It's all you guys fitting them now I can't go without any longer :lol:
I might tap you up for some help when it comes to fitting if that's ok, seems fairly straightforward, just the dipstick 'bending' which not too sure about. Was going to get the CSL dipstick but not paying over £100 in parts just for that :headbang:

Those chain plier things you recommended for the airbox clips work a treat by the way, much easier than anything I've used previously when I had the aribox off for some cleaning the other week. :thumbsup:
:lol: it's addictive! Best mod on the S54 bar none, the noise is gorgeous and the mid range after is so much better!

Shout if you need any tops I've had mine on and off several times, do the thermal insulation while your at it :thumbsup:

Dipstick I just rotated the OEM one out the way and clipped it up behind one of the chassis braces, near enough and can still check the oil easily, let me know if you want pics :thumbsup:

Awesome cheers, I’ll drop you a PM :thumbsup:
 
Back
Top Bottom