Z4-forum.com

*****Please PM me if you would like a loom. Posts on here are not highlighted so I might miss them. *****


Looking to offer custom Cruise Control looms, these won't require any cutting of the loom around the LCM. Likewise at the ECU I look to provide the correct termination so no cutting required again.

At present cost is looking at £23 delivered for non ///M and £25 for ///M.

I am also happy to fit Cruise Control for the cost of the parts plus £50.

Any interest?

** Update **

Ready to start production. Things you should know and be happy about before parting with your cash.

1. All plug and play, but two wires will require heat shrink tube (supplied) to insulate and keep them together as it's not been possible to source plugs/sockets.

2. Due to the LCM pins being impossible to source I bought an LCM loom and will be using these tails, so not all looms will have the same wiring colours. All looms will be clearly labelled though so it will be easy to understand along with the instructions provided.

3. Any questions or queries please ask.

Yeah I'll have one please!

Got the stalk sat in my garage waiting for it

tried emailing bummertune about the one they make tried both emails and ebay but they just ignored me.

Don't mind being a Guinea pig and happy to take a ton of photos during fitting to make a guide

If I hadn't just fitted the BMW one I would have been very interested in this. I think the idea of a non-cutting loom with proper clear instructions is excellent !

Hi srhutch,

I'm in for this as long as its got idiot proof instructions

I may well be very interested in this. Do you have any photos/guide for how to fit using the loom you have made?

Cheers,

Jon.

Just trying to get confirmation on a few parts. Will keep you updated.

srhutch wrote: ↑Thu May 25, 2017 10:08 pm Just trying to get confirmation on a few parts. Will keep you updated.

That's great, thanks.

Hi srhutch
Count me in for a loom, just need to source the switch

I'm in the market for cruise control so may be interested

Interested!

If the loom would fit my 3.0 E85 2005 (Build date means no plug n play straight swap in for cruise stalk ) with an electrical numptys chance of fitting I would love one

Count me in

All was looking good until I got the price of one part today. I'm going to double check it guys so I will keep you updated.

Hi srhutch,

Keep in mind that for some of us the attraction is not having to cut into any loom - might stretch a little further to avoid that - particularly if you could unplug your additional loom and have the Zed still working if it all goes t*ts up.