Z4-forum.com

download/file.php?id=4224 hears a picture of them fitting over the top.

Any 35is exhsust tips?

sunnydays wrote: ↑Thu Nov 30, 2017 11:23 pm Any 35is exhsust tips?

I have done them PM if keen as they are a bit different from the norm.

I've had mine about 2-3 years now, still look perfect with a quick polish now and again.

Mark-Z4 wrote: ↑Sat Dec 02, 2017 11:15 am I've had mine about 2-3 years now, still look perfect with a quick polish now and again.

I would like 2 for my BMW Z4 3.0

Are these bolt on?or can you secure them with a clamp ?

Great service from Mat.
Tips posted yesterday, arrived this morning, well wrapped.
Hopefully fit tomorrow and will post a picture.
Thanks Mat.

mm tips all fitted

Looking good. Really do make all the difference, especially when like me your car didnt have the optional extra Bmw tips on already. Even if you do Matt's are a nice upgrade.

Machine monkey wrote: ↑Tue Nov 28, 2017 10:10 amI do make them for M cars £90 for the 4 tips.
You have 2 options
1 i make them to fit over the original tips
2 remove the tips and fit new ones. Removing the tips on the M is a bit more involved. The bumper needs to come off. And the rivets need drilling out.

If you close to me ox28 i can fit them for you. Or i can talk you through it and loan you the tools if required.

Machine monkey wrote: ↑Tue Nov 28, 2017 10:10 amI do make them for M cars £90 for the 4 tips.
You have 2 options
1 i make them to fit over the original tips
2 remove the tips and fit new ones. Removing the tips on the M is a bit more involved. The bumper needs to come off. And the rivets need drilling out.

If you close to me ox28 i can fit them for you. Or i can talk you through it and loan you the tools if required.

Do you have a set for a Z4M available or would you need to manufacture?
Would make the rear look great with larger tailpipes

They are all made to order. Let me know if you want some i will order material and make them and get them sent out. Usually 10 day turnaround after payment is received. Quicker if i don’t need to order in material. I would just need to know how you wanted to fit them. Remove old tips or slid on over?

Machine monkey wrote: ↑Mon Feb 19, 2018 8:42 amThey are all made to order. Let me know if you want some i will order material and make them and get them sent out. Usually 10 day turnaround after payment is received. Quicker if i don’t need to order in material. I would just need to know how you wanted to fit them. Remove old tips or slid on over?

I would like to remove the existing tailpipes, then add the new larger ones.
Let me know what you need and how regarding payment thanks.

Z4Mitchell wrote: ↑Mon Feb 19, 2018 9:00 pm

Machine monkey wrote: ↑Mon Feb 19, 2018 8:42 amThey are all made to order. Let me know if you want some i will order material and make them and get them sent out. Usually 10 day turnaround after payment is received. Quicker if i don’t need to order in material. I would just need to know how you wanted to fit them. Remove old tips or slid on over?

I would like to remove the existing tailpipes, then add the new larger ones.
Let me know what you need and how regarding payment thanks.

You have a PM buddy

I'm going to put the backbox back on my car and could do with some tips to go on it, PM sent Machine monkey.

Machine monkey wrote: ↑Mon Oct 30, 2017 8:52 am
I can make them for your car i would just need some measurements taking? Or if you can get to ox28 i can measure and make and fit for you. And you can see if you want them or not?

I'm really keen for a set on my E89 (13 plate - 2.0 the turbo one) - I think the 18, 20 and 28i are the same?. What measurements do you need?
Outside diameter of the standard pipe?
Diameters of the existing tips?
depth of the tips?
I know one of the pipes and (existing) tips has the exhaust flap through it, do you need measurements for a cut-out for that too?
I can take some pics when the rain buggers off if that helps?

Cheers!
Ewan