Z4-forum.com

I think I have the latest software being 4-1/00.
The intravee manual suggests that 4-1/40 or above is required for enhanced options like scrolling through a list of Albums rather than the next or increments of 10.
Anyone?

TIA

Yes, so you have version 100 then which is great (ie. 100 is shown as 00)

Set your Intravee to 40 or above and you will have the advanced options available

pvr wrote:Yes, so you have version 100 then which is great (ie. 100 is shown as 00)

Set your Intravee to 40 or above and you will have the advanced options available

Cheers......something else on tomorrows todo list.

You mean in addition to going to work?

pvr wrote:You mean in addition to going to work?

Not back to work until Weds so plenty of play time.

road warrior wrote: ↑Fri May 10, 2019 6:42 am

jimbo1958 wrote: ↑Sun Feb 06, 2011 9:24 pm I think I have the latest software being 4-1/00.
The intravee manual suggests that 4-1/40 or above is required for enhanced options like scrolling through a list of Albums rather than the next or increments of 10.
Anyone?
This applies to what cars.. ?
TIA

This applies to the Mk IV navigation system - so any E85/86 with nav.

To find the current version go into the settings menu and you will see SW x-y/zz In the upper right hand corner and it should say something like SW 4-1/00

SW x-y/zz breaks down as

x should be 4 indicating that it's a MKIV nav
y shouild be 1 indicating that it's the full colour 'high' nav system

zz is your current firmware version
00 = v31 or v32 (latest official versions, released in 2008, BMW didn't update the number between releases)
91 = v29.1 or v30 (BMW didn't update the number between releases)
80 = v28
71 = v27.1
70 = v27
plus you'll find others that tend to be 0(something), these are usually a v32 firmware that has been modified - when I create custom ISOs I tend to modify the internal version number of the firmware to 1002 so it displays under settings as SW 4-1/02

NB you can only 'update' with a firmware version that's different to the one that's already installed so, if you need to install a modified version of the latest firmware that hasn't had its internal version number changed, you first need to install an old firmware version i.e. downgrade first, then repeat the process with the modified disc to upgrade

thanks.. i will go check |!