Page 1 of 1

Boot unlock

Posted: Tue Aug 13, 2024 6:18 pm
by Chippie
I don’t know it’s standard on all the e89’s but it always bugged me that I had to unlock the car before I could open the boot, but whilst I was coding something else I noticed an option in NCSDummys to have the boot open while the car is locked.
So for anyone interested simply alter aktiv to nicht_aktiv in HK_GESPERRT_IN_GESICHERT
In the CAS module
IMG_7848.jpeg
IMG_7848.jpeg (138.1 KiB) Viewed 6786 times

Boot unlock

Posted: Tue Aug 13, 2024 6:33 pm
by B21
Chippie wrote: Tue Aug 13, 2024 6:18 pm I don’t know it’s standard on all the e89’s but it always bugged me that I had to unlock the car before I could open the boot, but whilst I was coding something else I noticed an option in NCSDummys to have the boot open while the car is locked.
So for anyone interested simply alter aktiv to nicht_aktiv in HK_GESPERRT_IN_GESICHERT
In the CAS module
IMG_7848.jpeg
:thumbsup:

Boot unlock

Posted: Tue Aug 13, 2024 7:04 pm
by javis20
Not sure what you mean, my keyfob opens the trunk with the doors locked. And I never coded that.

Boot unlock

Posted: Tue Aug 13, 2024 7:07 pm
by Chippie
javis20 wrote: Tue Aug 13, 2024 7:04 pm Not sure what you mean, my keyfob opens the trunk with the doors locked. And I never coded that.
Mine wouldn’t, if the car was locked I had to unlock the car before I could open the boot, now after changing the coding I can open it with the car locked by pressing the boot open button on the fob.

Boot unlock

Posted: Wed Aug 14, 2024 7:36 am
by AnubisZed
Yeah mine won't open without the car being unlocked first.
Nice find :thumbsup: :driving:

Boot unlock

Posted: Wed Aug 14, 2024 8:44 am
by Lynchy
Just following on from that OP, I have a 2010 35i MSport and it bugs me that I can’t lower or close my windows via the key fob.

Boot unlock

Posted: Wed Aug 14, 2024 9:40 am
by Chippie
Copied this from the e90 forum, hope it helps.
Lower and raise windows from key fob

CAS MODULE (set both of these lines to aktiv)

KOMFORTSCHLIESSUNG_FB
FH_KOMFORTF_MIT_SUBST


CTM MODULE (all of these lines need to be set to aktiv, some may already be set to aktiv!) I am not sure its the same with CVM module..


KOMFORT_OEFFNEN_FBD
KOMFORT_LADE_POSITION
KOMFORT_SCHLIESS_FBD
SCHEIBEN_ANHEB_OEFF_FBD
SCHEIBEN_ANHEB_SCHL_FBD


NFRM MODULE

SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP