A Less Sensitive Indicator ?

Marcoose · Post by **Marcoose** » Sat Feb 10, 2024 5:18 pm

Morning.

First world problems ... at times the indicator is too sensitive to small steering inputs. I'm approaching a junction, put on the indicator, and whilst fitting the car into the turning lane, going around potholes, etc, the indicator turns off. There are times I have to put on the indicator 3-4 times for the same turn.

Obviously not the end of the world. But has anybody made the indicator less sensitive ?

Thanks.

Pondrew · Post by **Pondrew** » Sat Feb 10, 2024 6:33 pm

It's a BMW! What do you need indicators for?
I didn't know they even came with indicators. Where are they, I need to check all three of mine to see if they have this option?

flybobbie · Post by **flybobbie** » Sat Feb 10, 2024 6:39 pm

Indicator stalk should be on the right with right hand drive, annoys me.

Pondrew · Post by **Pondrew** » Sat Feb 10, 2024 8:19 pm

flybobbie wrote: ↑Sat Feb 10, 2024 6:39 pm Indicator stalk should be on the right with right hand drive, annoys me.

Pre-2000 ish Japanese cars had them. Bloody confusing IMO.

BeardyJon · Post by **BeardyJon** » Sun Feb 11, 2024 12:48 pm

I'm constantly having this problem. I've coded the one-touch indicator to blink 7 times to take the steering override out of the equation.

flybobbie · Post by **flybobbie** » Mon Feb 12, 2024 9:46 am

Annoys me when i try to cancel only to end up resetting it on or hit opposite.
Took me a while to get use to it's operation.

Z4-forum.com

Z4-forum.com