Snow foam recommendations required

Coupe_Dave · Post by **Coupe_Dave** » Fri Feb 09, 2024 5:34 pm

Hi there,

I’m looking for recommendations

I have been using demon shine snow foam for about 18 months with my K2 Karcher and the standard karcher lance or nozzle, whichever you want to call it without a problem.

About 2 months ago my nozzle stopped working, just water came through, so i thought it was broke and bought a new one.

Now the new one does the same, i ‘think’ demon snow foam has started putting wax in to the mixture and this is blocking the nozzle. i am currently soaking the lance in citric acid trying to clear it.

But, can anyone recommend either a lance to cope with demon shine or a different snow foam that works with a Karcher nozzle ??

What are you guys using ??

Reamesy · Post by **Reamesy** » Fri Feb 09, 2024 5:36 pm

I use this. It’s concentrated so lasts a while.

https://www.eurocarparts.com/p/auto-fin ... YWWha0&amp

Doddsy · Post by **Doddsy** » Fri Feb 09, 2024 6:09 pm

I’ve been using Bilt Hamber AutoFoam for years
https://www.mycarcleaning.co.uk/product ... gIH4fD_BwE

Huzee4 · Post by **Huzee4** » Fri Feb 09, 2024 6:39 pm

Doddsy wrote: ↑Fri Feb 09, 2024 6:09 pm I’ve been using Bilt Hamber AutoFoam for years
https://www.mycarcleaning.co.uk/product ... gIH4fD_BwE

Excellent stuff, I can recommend their alloy wheel cleaner and APC too

Coupe_Dave · Post by **Coupe_Dave** » Sat Feb 10, 2024 9:15 am

Thanks for your replies guys, i’ve got a few options to try now

Dave

Gwest44 · Post by **Gwest44** » Sat Feb 10, 2024 9:29 am

Huzee4 wrote: ↑Fri Feb 09, 2024 6:39 pm
Doddsy wrote: ↑Fri Feb 09, 2024 6:09 pm I’ve been using Bilt Hamber AutoFoam for years
https://www.mycarcleaning.co.uk/product ... gIH4fD_BwE
Excellent stuff, I can recommend their alloy wheel cleaner and APC too

+1 for the Bilt Hamber - I've been using it for over year now and only just about to start on my 2nd bottle. I also use it with the Karcher lance and it goes on great

https://amzn.eu/d/fhj2a0r
https://amzn.eu/d/j31creA

patriot66 · Post by **patriot66** » Sat Feb 10, 2024 10:05 am

I prefer the Bilt Hamber Touchless as it's very slightly lower pH than AutoFoam (neither are pH neutral

)and it's 'sugar' based rather than alkaline based like the AutoFoam. My P.I.R is 5% and I let it dwell 5 minutes. Shifts the dirt superbly, especially if you have a decent last stage protection (wax/sealant) applied. It's also slightly cheaper than AutoFoam

: 275fb50cf4aee5bc49caafb43ea6125c-2.jpg (54.96 KiB) Viewed 438 times

Z4-forum.com

Z4-forum.com