Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Dent Removal Technique
- Rudd
- Senior Member
- Posts: 2009
- Joined: Sun May 24, 2009 9:35 am
Re: Dent Removal Technique
its frozen CO2
hence the instant solid to gas reaction when heated.
hence the instant solid to gas reaction when heated.
- peddy
- Lifer
- Posts: 3698
- Joined: Wed Jul 08, 2009 10:58 pm
- Location: London
Re: Dent Removal Technique
Thank you for your enquiry.
We supply dry ice for domestic use, provided that the delivery is within Central London, and the cost is £35.00, plus VAT (£40.25), for a quantity of 10kg. This price includes delivery.
We supply the smaller quantity of 5kg for collection only, this amount costs £20.00, plus VAT (£23.00).
Dry Ice is supplied in individually wrapped 1kg slices, or you can request that we crush it into pellets for you.
It is quite difficult to advise on how to use dry ice, as you really need to experiment with it personally.
Generally, you get a bigger effect depending on the temperature of the water that you add it to. The hotter the water is, the more ‘smoke’ will be created and the dry ice will sublimate or evaporate quicker.
Dry ice cannot be stored, as it is -80 degrees, therefore you need to obtain it close to the time that it is to be used.
I shall attach an information sheet for you on the safe handling of dry ice.
Please do not hesitate to get back to me, should you require any further information or to place an order. We require a 1 hour delivery window, i.e. 2-3pm.
Many thanks.
Kind regards,
Natasha Gudima
Eskimo Ice
Unit A 45-48
New Covent Garden Market
Vauxhall
London SW8 5EE
Tel: +44(0) 207 720 4883
Fax: +44(0) 207 720 2731
http://www.eskimo-ice.co.uk
- MarkC
- Member
- Posts: 77
- Joined: Sun Jul 08, 2007 1:50 pm
- Location: Yorkshire
Re: Dent Removal Technique
This one with compressed air; http://www.autoblog.com/2007/05/29/vide ... essed-air/
Is this the same compressed air you can buy at computer stores? I wouldn't think such a cold spray would be used to clean computer keyboards etc. Perhaps it's only cold when held upside down and sprayed (?).
I have some small C0 cylinders used to air up motorbike tyres, perhaps aiming one of these at a heated (with hair dryer) dent would work the same.
The Zed has two small dents near the fuel filler, been there for more than 5 years, wonder if this trick would still work.
Is this the same compressed air you can buy at computer stores? I wouldn't think such a cold spray would be used to clean computer keyboards etc. Perhaps it's only cold when held upside down and sprayed (?).
I have some small C0 cylinders used to air up motorbike tyres, perhaps aiming one of these at a heated (with hair dryer) dent would work the same.
The Zed has two small dents near the fuel filler, been there for more than 5 years, wonder if this trick would still work.
- peddy
- Lifer
- Posts: 3698
- Joined: Wed Jul 08, 2009 10:58 pm
- Location: London
Re: Dent Removal Technique
looks good, but one thing i found strange was the fact that the panel he was working on was very flimsy. if you look at it again you can see it go inwards when he is wiping it off at the end.
-
- Member
- Posts: 821
- Joined: Sun Jan 25, 2009 5:07 pm
Re: Dent Removal Technique
id imagine on thin metals it would work, but maybe not on quality european cars, id be doubtful on a bmw, and obviously plastic panels it will never work on, but hey for a few quid its worth a shot
- MikeS
- Member
- Posts: 302
- Joined: Thu Jul 02, 2009 2:49 pm
- Location: Rottingdean nr Brighton
Re: Dent Removal Technique
What we need is someone to give all of this a test to see if it does work. Anyone out there with a few dents fancy giving it a try?
SDRIVE35i Space Grey, 7 speed DCT, adaptive M suspension, V Spoke 19" wheels, Nav pro with HDD, Comfort access and most of the other toys!
- sk93
- Lifer
- Posts: 3970
- Joined: Mon Oct 19, 2009 9:20 pm
- Location: Nottingham
- Contact:
Re: Dent Removal Technique
i've got a very small dink in the passenger door (damn girlfriends!), so if I can find a can of liquid CO2 this weekend, I'll give it a shot.MikeS wrote:What we need is someone to give all of this a test to see if it does work. Anyone out there with a few dents fancy giving it a try?
If it all goes wrong, that's what insurance is for
-
- Newbie
- Posts: 7
- Joined: Mon Dec 16, 2013 10:05 pm
Re: Dent Removal Technique
An alternative to dry ice is to use a can of compressed air held upside down. You can buy them at hobby shops. The dent needs to be warmed up with a hair drier first and then the area given a good 10 second blast at close range. You will see an ice layer form and when the ice dissappears, the dent will too. There are videos on youtube . Hope this helps.
-
- Senior Member
- Posts: 1008
- Joined: Sat Sep 14, 2013 6:35 pm
- Location: Sutton
Re: Dent Removal Technique
I think they are referring to frozen CO2. When I did stage effects and I used it to make the fog that rolls over the floor.
Probably won't work on my bike fuel tank
Probably won't work on my bike fuel tank
2007 3.0si Coupe, LED interior lights, Stubby, ZHP, AC Schnitzers, 15mm spacers on the rear. 1993 Modified Pre-Cat TVR Griffith, Ducati Monster 821, MV Agusta F3 675
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: Dent Removal Technique
Hasnt this been proven it is total bull cr@p!
It has been mentioned on another forum as well as when the car is in the sun the panel will warm up and the dent would reapear?
Plenty of other clips on the internet trying this and none of them succeed!
It has been mentioned on another forum as well as when the car is in the sun the panel will warm up and the dent would reapear?
Plenty of other clips on the internet trying this and none of them succeed!
- inkey$
- Lifer
- Posts: 10479
- Joined: Sun Mar 21, 2010 9:48 pm
- Location: Sevenoaks & Suffolk
- Contact:
Re: Dent Removal Technique
The upside-down compressed air onto localised heated dent I've seen before and seems easy enough.
Current: Project Audi A2 1.4SE
Previously: Z3R 2.8 • E46 330i • Z4R 3.0 • Z4///MC • E90 335i • Z4///MR • Z3///MC 'Breadvan' • Z3R 2.8 • E30 325i R • Z4C • Z4R 3.0
Previously: Z3R 2.8 • E46 330i • Z4R 3.0 • Z4///MC • E90 335i • Z4///MR • Z3///MC 'Breadvan' • Z3R 2.8 • E30 325i R • Z4C • Z4R 3.0
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: Dent Removal Technique
Have you seen it in person?inkey$ wrote:The upside-down compressed air onto localised heated dent I've seen before and seems easy enough.
- inkey$
- Lifer
- Posts: 10479
- Joined: Sun Mar 21, 2010 9:48 pm
- Location: Sevenoaks & Suffolk
- Contact:
Re: Dent Removal Technique
Only online but seems simplest.
Ordering dry ice in the uk looks the proverbial arse ache.
Ordering dry ice in the uk looks the proverbial arse ache.
Current: Project Audi A2 1.4SE
Previously: Z3R 2.8 • E46 330i • Z4R 3.0 • Z4///MC • E90 335i • Z4///MR • Z3///MC 'Breadvan' • Z3R 2.8 • E30 325i R • Z4C • Z4R 3.0
Previously: Z3R 2.8 • E46 330i • Z4R 3.0 • Z4///MC • E90 335i • Z4///MR • Z3///MC 'Breadvan' • Z3R 2.8 • E30 325i R • Z4C • Z4R 3.0
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: Dent Removal Technique
To be honest both methods have came up as no good. As there are numerous bideos of people trying both ways to no success. Whilst attempting them on the smallest of dents. Looks good though and the idea is plausible to a degree!
- SamUK
- Member
- Posts: 409
- Joined: Mon Oct 20, 2014 11:43 pm
Re: Dent Removal Technique
So, anyone tried this?