How do I remove front bumper washer holders?

skmattwell · Post by **skmattwell** » Mon May 29, 2023 11:11 pm

Anyone removed the holders for the headlights washers? I have a bumper that need repairing but the rear is covered by the plastic covers that usually hold the washer mechanism. Can it be removed without breaking it off?

chanlon1 · Post by **chanlon1** » Wed May 31, 2023 1:44 pm

The washer unit just clips in with the two clips either side. You should be able to slide a couple of screwdrivers under the connections to release it.

skmattwell · Post by **skmattwell** » Wed May 31, 2023 2:59 pm

chanlon1 wrote: ↑Wed May 31, 2023 1:44 pm The washer unit just clips in with the two clips either side. You should be able to slide a couple of screwdrivers under the connections to release it.

Sorry probably wasn't very clear in my original post. Have removed the washers but I need to remove the entire bracket that holds the washers. It seems to be a separate piece of plastic from the bumper itself but its held in very well

chanlon1 · Post by **chanlon1** » Wed May 31, 2023 5:59 pm

skmattwell wrote: ↑Wed May 31, 2023 2:59 pm Sorry probably wasn't very clear in my original post. Have removed the washers but I need to remove the entire bracket that holds the washers. It seems to be a separate piece of plastic from the bumper itself but its held in very well

No worries, but unfortunately I can't help you there. I've only ever taken the washer unit out of their clips whilst the bumper was still on, so I have no idea how those clips are attached to the actual bumper.

Are they glued on?

Z4-forum.com

Z4-forum.com