Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
New brakes, new problem. Help please
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
Over the last couple of days (yes it's taken that long, don't ask!) I have changed all discs and pads on my daughter's Mini, so I can be finally happy for her to use the bloody thing. All the discs were massively under minimum thickness, had huge edges on them and the pads were pretty much down to the backing (wear sensors had been disconnected and tied up).
I finished them this afternoon, all looking good, bolts tightened, pad springs renewed, etc, etc. So I took it out for a test drive.
Brake pedal goes to the floor with very little braking effect! I didn't expect the pads and discs to be great out of the box, but there is something amiss with the hydraulics! Feels like someone has changed the fluid for sponge!
I didn't disconnect the brake lines, all calipers were tied up while working on each corner. No fluid leaks anywhere.
The reservoir did overflow as I had to wind all four pistons back a long way, due to how 'used' the old discs and pads were.
The reservoir is still full of brake fluid. I can pump the hydraulic pressure up with the pedal but it just goes away again, instantly!
Any ideas? Could I have got air in the system from the reservoir overflowing? I'm stumped and it is pi*sing me off!
I finished them this afternoon, all looking good, bolts tightened, pad springs renewed, etc, etc. So I took it out for a test drive.
Brake pedal goes to the floor with very little braking effect! I didn't expect the pads and discs to be great out of the box, but there is something amiss with the hydraulics! Feels like someone has changed the fluid for sponge!
I didn't disconnect the brake lines, all calipers were tied up while working on each corner. No fluid leaks anywhere.
The reservoir did overflow as I had to wind all four pistons back a long way, due to how 'used' the old discs and pads were.
The reservoir is still full of brake fluid. I can pump the hydraulic pressure up with the pedal but it just goes away again, instantly!
Any ideas? Could I have got air in the system from the reservoir overflowing? I'm stumped and it is pi*sing me off!
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- B21
- Lifer
- Posts: 5402
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
New brakes, new problem. Help please
Air in the system..purge each brake starting at the back…I use an eazy bleeder to help do it with just one bod..
If you are really lucky you’ve got some air in the DCS unit
If you are really lucky you’ve got some air in the DCS unit
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
I don't understand HOW I got could have got air in the system, though!
Never bled brakes before! Makes me a bit nervous TBH.
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- smorris_12
- Member
- Posts: 902
- Joined: Mon Apr 18, 2022 2:14 pm
- Location: Somerset
New brakes, new problem. Help please
Sounds like the master cylinder. When they get old large amounts of travel or having fluid pumped the wrong way can upset the seals. If it was air in the system I wouldn't expect the pedal to ever get hard as it acts like a perfect spring.
OB side note: what is it with mechanics only ever changing pads no matter the state of the disc? I see this again and again. Are they just lazy? You'd think adding on a set of discs would bring them even more money[1] in and, with it on a ramp and with air tools to hand, it's hardly much more effort.
[1] I boggle at what garages charge for doing brakes. I suppose it's a money spinner and no-one will argue with a safety critical thing.
OB side note: what is it with mechanics only ever changing pads no matter the state of the disc? I see this again and again. Are they just lazy? You'd think adding on a set of discs would bring them even more money[1] in and, with it on a ramp and with air tools to hand, it's hardly much more effort.
[1] I boggle at what garages charge for doing brakes. I suppose it's a money spinner and no-one will argue with a safety critical thing.
------
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
Is there a way I can ascertain this for sure, myself? I can't even find the master cylinder at present!smorris_12 wrote: ↑Mon May 08, 2023 8:06 am Sounds like the master cylinder. When they get old large amounts of travel or having fluid pumped the wrong way can upset the seals.
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- Rockhopper
- Senior Member
- Posts: 1111
- Joined: Fri Mar 06, 2020 7:05 pm
- Location: Mansfield
New brakes, new problem. Help please
Master cylinder is likely directly underneath the reservoir.
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
Thanks all for the help.
I think it IS the master cylinder seal (or something wrong with the MC) as it will pump up hard with the engine off and stay like it, but with the engine running it will pump up and then slowly sink with pressure on the pedal.
I have now spent more money on this poxy car than all my others put together in two years! And it still can't be driven.
Four new tyres
Three wheels straightened
One new (used) wheel
discs and pads all round
now this!
I think it IS the master cylinder seal (or something wrong with the MC) as it will pump up hard with the engine off and stay like it, but with the engine running it will pump up and then slowly sink with pressure on the pedal.
I have now spent more money on this poxy car than all my others put together in two years! And it still can't be driven.
Four new tyres
Three wheels straightened
One new (used) wheel
discs and pads all round
now this!
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- pvr
- Legend
- Posts: 26227
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
New brakes, new problem. Help please
If you had bought a Jaguar, it would have been the second most expensive intead of the most expensive
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
A little update for anyone interested..
I took it out again to test it. It was better. Once home I noticed all four discs were extremely hot even though I had only done a few miles around town. I lifted each corner and checked how free each wheel was. All four were binding very slightly.
As the discs are all new, I could see where the pads were touching the discs. It wasn't even on any of them. The nearside rear was discoloured where it was getting too hot (I presume).
So I took all calipers and pads off (again). I removed the caliper slide pins, cleaned them and re-greased (high temp grease). Greased all pistons around the rubber dust boots, sanded the edges of the pad 'wings' to remove any paint and get them totally flat. I then put a tiny bit of grease in the pad sliding clips and re-assembled.
Much better. All discs are now running much cooler and the pads are sitting flat on the disc surfaces. Still need a bit more 'bedding in' but it now stops so I am finally happy to let my learner driver daughter out in the bloody thing.
Incorrect....again!
Thanks for this. I think this was exactly the problem. I reckon I turned the seals 'inside out' as it were by forcing fluid the wrong way. After leaving it pumped up with pedal pressure overnight, it was much better the next day. Not great but better. Pedal no longer went to the floor with the engine running.smorris_12 wrote: ↑Mon May 08, 2023 8:06 am Sounds like the master cylinder. When they get old large amounts of travel or having fluid pumped the wrong way can upset the seals. If it was air in the system I wouldn't expect the pedal to ever get hard as it acts like a perfect spring.
I took it out again to test it. It was better. Once home I noticed all four discs were extremely hot even though I had only done a few miles around town. I lifted each corner and checked how free each wheel was. All four were binding very slightly.
As the discs are all new, I could see where the pads were touching the discs. It wasn't even on any of them. The nearside rear was discoloured where it was getting too hot (I presume).
So I took all calipers and pads off (again). I removed the caliper slide pins, cleaned them and re-greased (high temp grease). Greased all pistons around the rubber dust boots, sanded the edges of the pad 'wings' to remove any paint and get them totally flat. I then put a tiny bit of grease in the pad sliding clips and re-assembled.
Much better. All discs are now running much cooler and the pads are sitting flat on the disc surfaces. Still need a bit more 'bedding in' but it now stops so I am finally happy to let my learner driver daughter out in the bloody thing.
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- mr wilks
- Legend
- Posts: 21897
- Joined: Wed Jul 04, 2012 10:02 pm
- Location: Lancashire
New brakes, new problem. Help please
No offence intended nut you clearly don't have much experience in this field so why would you choose a daughters runaround to start exploring your mechanical skillset this a perfect example of why as a buyer i am always wary of owners who say they carry out the maintenance themselves
Didn't you notice the brakes were shot when you were buying ? rookie error there mr P
Didn't you notice the brakes were shot when you were buying ? rookie error there mr P
3 ZMRs
3 E89s
5 Si coupes
5 Si roadsters
997 C4
TTRS
F82 M4
MK7 Golf Gti
current Bmw 6 Gran Turismo
3 E89s
5 Si coupes
5 Si roadsters
997 C4
TTRS
F82 M4
MK7 Golf Gti
current Bmw 6 Gran Turismo
-
- Lifer
- Posts: 8451
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
New brakes, new problem. Help please
I knew the brakes needed changing, yes. It was tricky telling the wheels were buckled and cracked, though.
I carried out the exact same brake work on the E89 when I bought it without any issues whatsoever. The brakes on that were (and still are) perfect. Maybe it's a Mini thing, or a brake parts thing, or maybe it's just a crap car. Not sure.
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- smorris_12
- Member
- Posts: 902
- Joined: Mon Apr 18, 2022 2:14 pm
- Location: Somerset
New brakes, new problem. Help please
Buying second hand cars is a lucky bag. They'll be stuff that's fine, stuff the owner is keeping schtum about and stuff they didn't realise had anything wrong with it. Lipped discs and worn pads wouldn't worry me in the slightest (see my earlier comment about mechanics) and there's no way of telling seals that are about to imminently fail, even if you spent hours crawling over it.
There's odd lurking problems that no-one would find unless you absolutely stripped down every last nut and bolt which may show up in a week or not for another 10 years.
There's odd lurking problems that no-one would find unless you absolutely stripped down every last nut and bolt which may show up in a week or not for another 10 years.
------
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
-
- Member
- Posts: 424
- Joined: Sun May 16, 2021 8:01 am
New brakes, new problem. Help please
I always crack the bleed nipple and let excess fluid out to prevent this sort of problem
2004 z4 3.0i Sterling silver
x5 40d m sport black sapphire metallic
Transit custom
x5 40d m sport black sapphire metallic
Transit custom