Anyone know if this will work with the rear ball joints on our cars?
https://www.astatools.co.uk/product/a-9055/
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Rear ball joint removal / installation tool
-
Online
- Member
- Posts: 341
- Joined: Tue Sep 10, 2013 11:59 pm
- Davz
- Member
- Posts: 507
- Joined: Mon Jul 10, 2017 8:35 pm
- Location: Wellington, Shropshire
Rear ball joint removal / installation tool
Looks more like a drift to remove a bearing or bush. Ball joints usually require a splitter tool.
2006 2.5 Monaco blue, orange footwell lights, Blue boot lights, 20/15mm wheel spacers, Buckley06 gear knob, Aux, MV2's, M pedals, Eibachs, Bilstein B4's, Whiteline front ARB. H&R rear ARB. Roof motor relocated, Alpine speakers, Xenons.
-
Online
- Member
- Posts: 341
- Joined: Tue Sep 10, 2013 11:59 pm
Rear ball joint removal / installation tool
Thank you - the rear ball joints are pressed into te trailing arm, like a bush.
- Jakg
- Member
- Posts: 367
- Joined: Thu Mar 29, 2018 12:36 am
- Location: Suffolk
Rear ball joint removal / installation tool
Without any measurements it's very tricky for anyone to say.
I would (/ did) get one of the big sets with different sized bits.
Or you can use a ball joint press and some sockets...
I would (/ did) get one of the big sets with different sized bits.
Or you can use a ball joint press and some sockets...