Z4-forum.com

Posted: **Thu Jun 16, 2022 10:41 pm**

Hi All

Does anyone have the procedure to remove this part?

It is in the truck and holds the carpet in place. In the center of it there is the microswitch of the convertible top.
in pic2 it is part number 4 and it is called the BMW OEM 03-08 Z4 Roll Bar-Upper Trim 51437110231.

I need to get the carpet out. I think there was a chipmunk living in there when the car was in storage.

And BTW my top won't go down not even when in manual mode. I think the bypass value is locked in the motor.

Posted: **Thu Jun 16, 2022 11:12 pm**

Here it is:

: 0DACD12F-A443-4143-93FE-1CE0DDAE7462.png (255.12 KiB) Viewed 908 times

Posted: **Thu Jun 16, 2022 11:33 pm**

Thank you Sir! Will have another look regards!

Posted: **Fri Jun 17, 2022 9:18 pm**

Well look easier with the pic you sent. However, do you have the other two procedures regarding the "convertible top compartment base and the "trim behind roll bar" much appreciated. And you have yourself a Happy Fathers day this weekend. It would be nice if I was able to get my top down this weekend for a spin but that another issue.

Regards,

Posted: **Fri Jun 17, 2022 11:25 pm**

Sure buddy. Here’s the compartment base, sorry I couldn’t get it all on one screen:

: 5B6BAA7E-411C-4971-A8CE-DA06A7A50E3C.png (394.92 KiB) Viewed 883 times

: 792FD9F9-B0DA-467C-9EEF-BE1E0E36FEEE.png (465.16 KiB) Viewed 883 times

Posted: **Fri Jun 17, 2022 11:26 pm**

And here’s the trim behind roll bar:

: BD6E1275-4846-4FE9-8AEC-4C54B76FEC8A.png (270.75 KiB) Viewed 883 times

Posted: **Sat Jun 18, 2022 12:54 am**

Zedebee you the man! just what the doctor ordered. Let me get to work and I will let you know the outcome. Have a good weekend!
Peace man!

Posted: **Sun Jun 19, 2022 4:26 pm**

Done! Got it out! Tons of work to follow up!

Posted: **Wed Jun 22, 2022 12:55 pm**

Here is the Hitch Hiker I found BTW!