Schrick camshafts and cam followers

GT Spec · Post by **GT Spec** » Mon Apr 25, 2022 6:31 pm

Hi all,

Has anyone installed aftermarket cams and new followers in their S54? Can the job be done without removing the cylinder head in order to slide out the cam follower shafts?

Many thanks

Vanne · Post by **Vanne** » Mon Apr 25, 2022 6:44 pm

yep.

GT Spec · Post by **GT Spec** » Mon Apr 25, 2022 6:47 pm

Vanne wrote: ↑Mon Apr 25, 2022 6:44 pm yep.

Hey Vanne!

So it can be done? How do you slide the shafts out?

Cheers

Jon2215 · Post by **Jon2215** » Mon Apr 25, 2022 7:29 pm

Basically,Cams lift out,vanos off, chain and sprockets,put at tdc and remove cam caps,lift out cam.

GT Spec · Post by **GT Spec** » Mon Apr 25, 2022 8:24 pm

Jon2215 wrote: ↑Mon Apr 25, 2022 7:29 pm Basically,Cams lift out,vanos off, chain and sprockets,put at tdc and remove cam caps,lift out cam.

Cheers Jon

I know the cams can be done in situ, it is the cam follower shafts I am unsure about as they need to be slid out from the front of the engine and I think the front panel etc will prevent that from happening

Ed Doe · Post by **Ed Doe** » Tue Apr 26, 2022 8:14 am

I think the followers can be done in situ, but it does require a fair chunk of the front end to be removed to slide the follower retaining 'posts' out of the front of the engine. Redish suggested they would be happy to try this with my car when looking at replacing the cams and followers, but in the end I elected to take the head off and do the head gasket whilst it was in bits...

Martyn · Post by **Martyn** » Tue Apr 26, 2022 9:57 am

I had to remove the whole front end on my E46 M3 to get the rods out.

GT Spec · Post by **GT Spec** » Tue Apr 26, 2022 2:18 pm

Thanks for the replies guys. Food for thought.

zmaster007 · Post by **zmaster007** » Wed Apr 27, 2022 6:16 pm

When mine had camshafts/followers done at the dealer it was a front end off job like the E46 above.

GT Spec · Post by **GT Spec** » Thu Apr 28, 2022 8:12 am

zmaster007 wrote: ↑Wed Apr 27, 2022 6:16 pm When mine had camshafts/followers done at the dealer it was a front end off job like the E46 above.

Cheers for that

Vanne · Post by **Vanne** » Thu Apr 28, 2022 6:12 pm

Yep, front of the car needs to come off.

GT Spec · Post by **GT Spec** » Thu Apr 28, 2022 7:51 pm

Vanne wrote: ↑Thu Apr 28, 2022 6:12 pm Yep, front of the car needs to come off.

Z4-forum.com

Z4-forum.com