Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

2006 Z4M Roadster Vibration at idle

"M" Specific discussion
Post Reply
Holmes312
Newbie
Newbie
Posts: 6
Joined: Fri Oct 29, 2021 12:03 pm
Location: Milton, Ontario

2006 Z4M Roadster Vibration at idle

Post by Holmes312 » Fri Oct 29, 2021 12:18 pm

Hi!
I have a 2006 E85 with 67,000 kms on it. I feel vibrations when holding the steering wheel at idle. When I rev it a little, its perfectly fine. I also feel this vibration when I touch the front wheels. All of this during idle. Driving the car at any RPM over 1k, its fine. Could my engine mounts be the issue? Thanks!
2006 Z4M Roadster Titanium Silver

User avatar
Mr Tidy
Legend
Legend
Posts: 23800
Joined: Wed Jul 02, 2014 12:18 pm
Location: North West Surrey

2006 Z4M Roadster Vibration at idle

Post by Mr Tidy » Fri Oct 29, 2021 11:37 pm

I have a 2006 E86 and got the rod bearing shells and engine mounts replaced last year on 78,000 miles.

I hadn't noticed what you described, but the old mounts were definitely well past their best!

The shells didn't look pretty either. :(

If you have a good BMW specialist hopefully they could tell if the engine mounts were looking tired.
Coupes because stunning!
Current - Silver Grey MC, Imola Red heated Nappa & carbon trim. Aeros, H & R Coil-overs, 224s, OE Strut brace, Nav, cup-holders, DSP Hi-Fi, pdc, cruise, MFSW, no CDV! E90 330i daily
Gone - Montego Blue
Gone - Ruby Black

tomjonesBT33
Member
Member
Posts: 75
Joined: Sun Oct 13, 2019 1:34 am

2006 Z4M Roadster Vibration at idle

Post by tomjonesBT33 » Tue Nov 30, 2021 4:58 pm

Does the vibration go away once the car is fully warmed up? If so, could be the VANOS vibrating.
2004 Z4 2.5i
2006 Z4 M Roadster
2017 X1 xDrive28i

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1629
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

2006 Z4M Roadster Vibration at idle

Post by AndyBeech » Tue Nov 30, 2021 5:24 pm

I would say engine mounts and / or engine mount bolts.
I doubt very much the VANOS would cause that unless you've got some serious issues, unless you mean the VANOS causing the engine to run a bit rough in which case that's possible.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

Holmes312
Newbie
Newbie
Posts: 6
Joined: Fri Oct 29, 2021 12:03 pm
Location: Milton, Ontario

2006 Z4M Roadster Vibration at idle

Post by Holmes312 » Tue Nov 30, 2021 5:45 pm

I purchased the car in August. I also realized it got new mounts from bimmerworld in 2019...perhaps I just feel more with these mounts...I may replace with OEM mounts in the future
2006 Z4M Roadster Titanium Silver

maupineda
Member
Member
Posts: 141
Joined: Fri Apr 24, 2020 4:46 pm

2006 Z4M Roadster Vibration at idle

Post by maupineda » Wed Dec 01, 2021 2:12 am

I have aftermarket mounts and yes, they vibrate more, to the point I see that vibration on the headlight cutoff lines. Considering going back to OE

Post Reply