Z4-forum.com

I fitted them to my E89. Nice and bright.

I hope these fit:

https://www.ecstuning.com/b-genuine-bmw ... 312468386/

raven wrote: ↑Sun May 02, 2021 4:26 pm

Marcusbimmer wrote: ↑Sat May 01, 2021 11:33 pm

raven wrote: ↑Sat May 01, 2021 8:43 am BMW sells them as well, a bit more expensiver probably, but they come with only a few logos, so i didn't buy it i wanted my company's logo in it.

I believe you can just pop them out and disconnect them then pop the other ones in, you need to have a light already at the bottom of your door (not sure if all G29s have this).

Took delivery today of the Z4. They tried to pop in the BMW-brand lights and they don’t fit this model. Apparently BMW doesn’t make them for this car.

then they probably ordered the wrong ones , you have 68 and 50mm ones the 50mm is for the Z4.

https://bmwshop.ekris.nl/nl/accessoires ... -50-mm-bmw
Product number: 63312463924
140euro

Marcusbimmer wrote: ↑Tue May 04, 2021 1:27 pm I hope these fit:

https://www.ecstuning.com/b-genuine-bmw ... 312468386/

Marcus those ones from ECS seem to be the 68mm ones. Raven said it had to be the 50mm ones. Just make sure you can get a refund in case they don't fit

Obs-Com wrote: ↑Thu Apr 29, 2021 8:06 pm .......the M40i will be worth waiting for. It’s an absolute stunner.

What he said, yes!

Ok so for whatever reason online it doesn’t list the actual LED projectors for the Z4 M40i. This is an error in the system where it believes the vehicle doesn’t have extended light package, which it does. This was confirmed by Cotswold BMW when I ordered.

There are a number of different projectors so be careful to order the correct one. You need part number: 63312463924

They’re super easy to fit, took less than five minutes. Just need a trim removal tool to click the old ones out and then it’s simple plug and play, after picking which projected lens you want.

ori wrote: ↑Thu Apr 29, 2021 10:09 pm Ok. So I’ve ordered the inserts and I have them, but have no idea how to fit them. It was the only option online for my m40i. I was surprised I didn’t need to order replacement lights, but only the inserts were an option.
How did you fit them?

They do make them, it’s part 63312463924

There is an error on the BMW system saying they’re not available for the G29, but they are a perfect fit

Marcusbimmer wrote: ↑Sat May 01, 2021 11:33 pm

raven wrote: ↑Sat May 01, 2021 8:43 am BMW sells them as well, a bit more expensiver probably, but they come with only a few logos, so i didn't buy it i wanted my company's logo in it.

I believe you can just pop them out and disconnect them then pop the other ones in, you need to have a light already at the bottom of your door (not sure if all G29s have this).

Took delivery today of the Z4. They tried to pop in the BMW-brand lights and they don’t fit this model. Apparently BMW doesn’t make them for this car.

Five minute job, plug and play, couldn’t have been simpler.

Took longer for me to decide which slide to use

Like with most things, buy cheap and you’ll buy twice. The BMW projector is more expensive yes, but it’s a perfect fit, the colours are vivid and bright.

Marcusbimmer wrote: ↑Fri Apr 30, 2021 12:23 am How did you go about installing them? Was it a pain in the butt?

are they like this in which case the lens just slips out

Similar yes but a totally different design to the one pictured, particularly with the way the slide is now encapsulated between two pieces.

Wish I’d taken photos before fitting now

Rucky wrote: ↑Wed May 05, 2021 2:55 pm are they like this in which case the lens just slips outpuddle.jpg

his one then - similar idea I guess

Similar but still not the same as the new projector. I’ll try and find a picture

Rucky wrote: ↑Wed May 05, 2021 3:27 pm his one then - similar idea I guesspuddle 2.JPG

This is the exact projector for use in the G29

Rucky wrote: ↑Wed May 05, 2021 3:27 pm his one then - similar idea I guesspuddle 2.JPG

is there anyone who fitted custom slides in their projector thingy? if yes, where did you get them?

I got mine installed at BMW today no problems fitting them at all, took about 5 minutes

I got mine fitted. Not sure they fitted them right as it’s not a perfect circle. How do you change the slides. You can twist the lens out, but I can see where they put the slide.