M2/3/4 437M on E85 si

[Darkangelv2]

Hi all

Just wanted to share my latest update.

I fitted the 437M today -

9” Fronts ET29 with 225/35
10” Rears ET40 with 255/35

Both Kumho Ecsta PS91.

The above tyre sizes do look ok but don’t offer much rim protection (I’m not going near any curbs!!). There’s no rubbing but I’m on BC Coilovers with CSL geometry.

First drive and they feel good - these are a lightweight forged wheel which is why I wanted them.

I’ll update here as I learn more about the wheels, tyres and setup

50DAF89E-46F8-449F-8F1C-BA252B080471.jpeg (324 KiB) Viewed 7903 times

AE054E36-5869-4AB4-B425-42989C563FC2.jpeg (269.29 KiB) Viewed 7911 times

76D7E996-CC51-4393-9F33-2C407B0D2427.jpeg (232.71 KiB) Viewed 7903 times

[Armscarf]

Looking good, they certainly fill the arches.

[Wyldie85]

Nice. I like those. Makes it look very muscular and stealth.

[Darkangelv2]

Thanks both!

Just want a dry day so i can give the car a proper clean, the new tyres a gentle ragging and can muck about with the suspension!

[True-Blue]

I’m really fancying a set of these for my E89, looking good

[Darkangelv2]

Small update:

1) Really enjoying the Kumhos. They’ve inspired confidence and not left me wanting. But ultimately my car only has 218 hp so really I’m operating well below what they were designed for. Hoping to do some track days to really test them later in the summer once my mate has finished rebuilding his GTA. At £400 for the 4, they’re definitely great value.

2) I want to fettle the front end slightly from a ‘looks’ perspective - ie. shave 3-5MM off the mating face of the wheel just to reduce poke slightly.

3) I should have gone with 235/35 on the front. I’m confident it would have fitted and would have looked a little less stretched on the wheel. Rears are spot on.

[LeeZ4MR]

That looks really good with those wheels on it.

I have the same wheels on my F82 M4 and I'm a really big fan of them.

[Darkangelv2]

That looks really good with those wheels on it.

I have the same wheels on my F82 M4 and I'm a really big fan of them.

What surprised me was the M4C wheels that followed them were heavier! Seemed illogical.

I’m settled with these wheels now - won’t be changing for a while now I think

[AnthonyK]

Hi,
I have a Brembo kit installed on my Z4M and want to upgrade to the 437M wheels also.

My Brembo kit needs a 10mm spacer on the 224M wheels to clear. What is the spacing between the spokes and the brake in your front setup?

[Ole gits rule]

That looks really good with those wheels on it.

I have the same wheels on my F82 M4 and I'm a really big fan of them.

Snap, have them on my F83 and they look really nice - better than the comp wheels anyway

[Mr Tidy]

Your car sits really well on those wheels.

I fitted a set of Kumho Ecsta P71s to my Z4 in 2021 and have been really pleased with them, and the full set only cost £400 delivered!

[Darkangelv2]

Agreed - the Kumhos have been great value.

Would have no qualms in replacing with the same again

[Darkangelv2]

Hi,
I have a Brembo kit installed on my Z4M and want to upgrade to the 437M wheels also.

My Brembo kit needs a 10mm spacer on the 224M wheels to clear. What is the spacing between the spokes and the brake in your front setup?

I’ll do my best to measure this weekend

[AnthonyK]

Thanks!

[AnthonyK]

Any luck on this ? thanks in advance

Hi,
I have a Brembo kit installed on my Z4M and want to upgrade to the 437M wheels also.

My Brembo kit needs a 10mm spacer on the 224M wheels to clear. What is the spacing between the spokes and the brake in your front setup?

I’ll do my best to measure this weekend