Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
FOR SALE BMW Z4 M Brake Cooling Kit
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
This kit replaces the non functional OEM brake cooling ducts and it uses the same mounting points. Horn relocation/rotation is needed to fit this kit and some cutting in the inner part of the wheel arches for the hose routing. The front backing plates replaces the OEM ones and in the rear you have to modify the OEM backing plates.
The kit includes brake cooling ducts for the front bumper, backing plates, funnels for the backing plates and brackets. All water cut metal pieces are NOT painted! Use rust protective paint for all the brackets and heat resistant paint for the backing plates. 3" fittings up front and 2" in the rear, hose and hardware are NOT included in this kit. Minor modifications to the brackets might be needed.
TomK made me aware that there's an OE block off cover for the wheel arches (From the 3.0 Z4) you can buy for cheap. The OE one in plastic cost around 5-6£ each side.
Part number 5 in this URL:
http://bmwfans.info/parts-catalog/E86/Europe/Z4_3.0si-N52/L-N/jan2006/browse/vehicle_trim/wheel_arch_trim_front/
Part numbers are:
51717056403
51717056404
Parts will be printed once payment is made, preferably via PayPal. The price in SEK is what I'm asking for when all fee's are paid (if you want buyers protection please add 5.5% to the total).
The prices are, with the exchange rate of 05/04/2022, the following:
-A complete front kit with race backing plates is 3.700 SEK (~TBD£)
or if you want to buy separately
- Front bumper ducts and brackets is 2.200 SEK (~TBD£)
- Race backing plate and funnels is 1.500 SEK (~TBD£)
- Standard backing plates and funnels is 1.200 SEK (~TBD£)
- A complete rear kit is 2.900 SEK (~TBD£)
or if you want to buy separately
- Rear intakes and brackets is 1.800 SEK (~TBD£)
- Rear backing plates/funnels is 1.100 SEK (~TBD£)
- As an option a mesh insert can be bought for the front bumper ducts to prevent stones and such to get into the hose, this option is an additional 150 SEK (~12£) per pair
- Hose holders for the shocks is 150 SEK (~TBD£) per pair
If you've bought a complete front brake cooling kit from me before or buy both a complete for the front and rear I will give you a discount of 1000 SEK (~TBD£).
The shipping cost (max 2 kg) to the UK is 220 SEK (~TBD£).
Since I had to change supplier for the metal parts I went from laser cutting to water cutting thus the metal parts will have minor surface rust/stains on them. A small issue since all metal parts have to be sanded before paint anyway.
Front bumper ducts and brackets.
Full kit with race backing plates.
Race backing plates.
Old picture left here so you can see how the standard backing plates look like.
You can also have a look in TomK's thread about this kit if you want to read more: viewtopic.php?f=9&t=117626
Or you can visit my original thread over at the ZPost forum: https://www.zpost.com/forums/showthread.php?t=1634387
Extras
Mesh inserts
Hose holders for the shocks, there's both a horizontal and vertical version.
Complete kit for the rear brakes:
Only intakes/brackets for the rear:
Only backing plates/funnels:
The kit includes brake cooling ducts for the front bumper, backing plates, funnels for the backing plates and brackets. All water cut metal pieces are NOT painted! Use rust protective paint for all the brackets and heat resistant paint for the backing plates. 3" fittings up front and 2" in the rear, hose and hardware are NOT included in this kit. Minor modifications to the brackets might be needed.
TomK made me aware that there's an OE block off cover for the wheel arches (From the 3.0 Z4) you can buy for cheap. The OE one in plastic cost around 5-6£ each side.
Part number 5 in this URL:
http://bmwfans.info/parts-catalog/E86/Europe/Z4_3.0si-N52/L-N/jan2006/browse/vehicle_trim/wheel_arch_trim_front/
Part numbers are:
51717056403
51717056404
Parts will be printed once payment is made, preferably via PayPal. The price in SEK is what I'm asking for when all fee's are paid (if you want buyers protection please add 5.5% to the total).
The prices are, with the exchange rate of 05/04/2022, the following:
-A complete front kit with race backing plates is 3.700 SEK (~TBD£)
or if you want to buy separately
- Front bumper ducts and brackets is 2.200 SEK (~TBD£)
- Race backing plate and funnels is 1.500 SEK (~TBD£)
- Standard backing plates and funnels is 1.200 SEK (~TBD£)
- A complete rear kit is 2.900 SEK (~TBD£)
or if you want to buy separately
- Rear intakes and brackets is 1.800 SEK (~TBD£)
- Rear backing plates/funnels is 1.100 SEK (~TBD£)
- As an option a mesh insert can be bought for the front bumper ducts to prevent stones and such to get into the hose, this option is an additional 150 SEK (~12£) per pair
- Hose holders for the shocks is 150 SEK (~TBD£) per pair
If you've bought a complete front brake cooling kit from me before or buy both a complete for the front and rear I will give you a discount of 1000 SEK (~TBD£).
The shipping cost (max 2 kg) to the UK is 220 SEK (~TBD£).
Since I had to change supplier for the metal parts I went from laser cutting to water cutting thus the metal parts will have minor surface rust/stains on them. A small issue since all metal parts have to be sanded before paint anyway.
Front bumper ducts and brackets.
Full kit with race backing plates.
Race backing plates.
Old picture left here so you can see how the standard backing plates look like.
You can also have a look in TomK's thread about this kit if you want to read more: viewtopic.php?f=9&t=117626
Or you can visit my original thread over at the ZPost forum: https://www.zpost.com/forums/showthread.php?t=1634387
Extras
Mesh inserts
Hose holders for the shocks, there's both a horizontal and vertical version.
Complete kit for the rear brakes:
Only intakes/brackets for the rear:
Only backing plates/funnels:
Last edited by Westersund on Fri Nov 10, 2023 6:13 pm, edited 10 times in total.
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
Nice winter project this for you track addicts.
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
BMW Z4 M Brake Cooling Kit
Awesome bit o kit
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
Thanks Vanne!
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
I have 2 kits ready to be shipped right away. 15 kits sold already without any complaints so there's no doubt this kit works and fits nicely.
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
I have backing plates fitting BMW Z4 now as well (1 hole needs a slight modification), I can make something for the front bumper if anyone is interested.
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
Track season is just around the corner!
-
- Newbie
- Posts: 44
- Joined: Mon Nov 04, 2013 6:20 pm
BMW Z4 M Brake Cooling Kit
No one tracks their Z4 M on this board?
-
- Senior Member
- Posts: 2257
- Joined: Sun Aug 31, 2014 4:33 pm
- Location: Essex
- Contact:
BMW Z4 M Brake Cooling Kit
I think there was something in the news that might impact the track season this year, can't exactly remember the details....
- Beedub
- Lifer
- Posts: 11003
- Joined: Wed Sep 10, 2008 2:25 pm
- Location: Sutton Coldfield
BMW Z4 M Brake Cooling Kit
TEMPTED!!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
BMW Z4 M Brake Cooling Kit
Don’t think it’ll be too bad. Can imagine it’ll be one of the activities that’ll carry on before too long due to the minimal social contact. Hopefully anyway!Angelus666 wrote: ↑Thu Apr 23, 2020 8:11 am I think there was something in the news that might impact the track season this year, can't exactly remember the details....
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
-
- Senior Member
- Posts: 2257
- Joined: Sun Aug 31, 2014 4:33 pm
- Location: Essex
- Contact:
BMW Z4 M Brake Cooling Kit
Amateurs tracking their cars will be pretty high on the risk list, so it'll surely be one of the last things to get approved.
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
BMW Z4 M Brake Cooling Kit
Not so sure about that, I doubt there will be guidance on what specific events can and can't run when the lock down is relaxed. It'll be more generic such as large open air gatherings etc and down to the TDO's to decide whether they can safely run, which I'm sure they'll push for as they will want the revenue as will tracks. There's rarely any major incidents, certainly less than on the roads on a daily basis so can't see that being an issue.
They seemed to be sensible with how they were run just before the lock down with briefings etc. so hopefully that'll carry on and they'll be back in business but we'll see of course.
They seemed to be sensible with how they were run just before the lock down with briefings etc. so hopefully that'll carry on and they'll be back in business but we'll see of course.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
- Seal3.0
- Member
- Posts: 176
- Joined: Sun Sep 02, 2012 2:00 pm
- Location: Sheffield
BMW Z4 M Brake Cooling Kit
Hi,
Any chance you make this kit for E85 to replace the front fog lights?
Cheers
Any chance you make this kit for E85 to replace the front fog lights?
Cheers