yg54sg wrote: ↑Tue May 05, 2020 9:34 pm
Actualizadas las imágenes en la publicación 1
Update
Instead of taking power from the license plate lights, it is better to run cable from the reverse pin to the right side to the left side, and from the left fog light pin to the right side and code xon ncs expert as follows:
Coding with NCS, for 12v and 6v.
PWM_ANSTEUERUNG_SL_RE_HI = Change to 01 (Default 02)
PWM_ANSTEUERUNG_SL_LI_HI = Change to 01 (Default 02)
BREMSLICHT_ALS_STANDLICHT = Change to Not Active (Default Active)
For no errors:
CC_STANDLICHT_RECHTS nicht_aktiv Check Control (CC) - parking lights - right
CC_STANDLICHT_LINKS nicht_aktiv Check Control (CC) - parking lights - left
WARMUEBERWACHUNG_SL_LI nicht_aktiv Hot monitoring - parking lights – left
WARMUEBERWACHUNG_SL_RE nicht_aktiv Hot monitoring - parking lights – right
KALTUEBERWACHUNG_SL_LI nicht_aktiv Cold monitoring - parking lights – left
KALTUEBERWACHUNG_SL_RE nicht_aktiv Cold monitoring - parking lights – right
KALTUEBERWACHUNG_FL nicht_aktiv Cold monitoring - high beams
WARMUEBERWACHUNG_FL nicht_aktiv Hot monitoring - high beams
that way it remains OEM.