![Embarassed :oops:](./images/smilies/blush-anim-cl.gif)
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Post 04 cruise control retrofit N52
- Bing
- Legend
- Posts: 26514
- Joined: Sun Oct 02, 2011 7:19 pm
- Location: Exiled Scot in Maidstone
Re: Post 04 cruise control retrofit N52
That's the same as my kit - we wanted to get the job finished (had to, as we'd cut wires before checking
), so soldered wires directly into the plastic holders instead. However if you have no time pressure I'd call Sopers and get them to send the right parts.
![Embarassed :oops:](./images/smilies/blush-anim-cl.gif)
Current... Silver Grey ///M Roadster, non-flimper spec, Imola Red nappa, permanent ear-to-ear grin ![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
- Z4 TEX
- Member
- Posts: 346
- Joined: Tue Nov 29, 2011 12:12 am
- Location: Leeds
Re: Post 04 cruise control retrofit N52
and you have 4 E instead of 2. Looks like they threw another set of E into the box.
I'm sure if you ring up Jamie at Sopers, he will sort it out for you.![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
![Rolling Eyes :roll:](./images/smilies/rolleyes.gif)
I'm sure if you ring up Jamie at Sopers, he will sort it out for you.
![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
![Image](http://i1260.photobucket.com/albums/ii568/z4_tex/MyZ4-2.png)
- MrPT
- Lifer
- Posts: 4747
- Joined: Sun Oct 21, 2012 7:44 pm
- Location: Bucks/Oxon
Re: Post 04 cruise control retrofit N52
Cool - thanks both. No time pressure so I'll give Jamie a buzz.
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone
2006 Z4 2.5si: gone
- MrPT
- Lifer
- Posts: 4747
- Joined: Sun Oct 21, 2012 7:44 pm
- Location: Bucks/Oxon
Re: Post 04 cruise control retrofit N52
Right - Sopers were excellent, as usual, so the replacement parts arrived without hassle and everything is now fitted. I did the cruise control retrofit and MFSW controls retrofit at the same time - probably too much to attempt in one go, but I was having a big balls day. It took a couple of long afternoons; I was checking everything as I went with a multimeter and also cleaning as many inaccessible bits as possible. I suspect the quoted "70 minutes" is the time that BMW estimate it will take you if you aim to royally f*ck it up.
Thanks jamiecarpenter for the excellent instructions.
I've got a few more tips/photos to add to the mix:
![Smile :)](./images/smilies/original.gif)
Thanks jamiecarpenter for the excellent instructions.
![Smile :)](./images/smilies/original.gif)
- A safe way to leave the battery disconnected it to trap the black lead using the removable boot floor:
- The cowling was more difficult than I expected to remove - needed a vigorous tug and I had to epoxy one of the locating pins back on afterwards. I started cutting it with a junior hacksaw but soon switched to a Dremel; much easier! Finished it off with wet & dry:
- As others have done, I removed the RHS vent unit which made accessing the LCM a lot easier
- Here's my loom work - looks very messy with both MFSW and CC retrofitted - improved only slightly when tied up. The white heatshrink is there because I relocated the connectors on the cables a couple of times; I was concerned about cable tension with the loom plugged back into the LCM (scotch locks are a scary hack!). The black heatshrink is there because, like the OP, I also picked the wrong black/brown wire to start with.
Untied:
Tied:
(the cloth-wrapped black cable with the scotch locks is the MFSW retrofit) - Feeding the blue wire behind the dash into the passenger footwell was easier than expected and only took a few seconds - the trick was to remove all the kinks in it first so it was rigid enough to push through. It also helps if you have "noodle arms"
- I noticed that you have to be careful to leave enough cable slack for the steering wheel column to go all the way down to its lowest position
- To pull the blue cable up into the electrics box, I tied an allen key to some gardening string and dropped it down through the hole in the bulkhead:
- I used a galvanised wire tether to pull the blue cable through into the IVM. The wire was very easy to feed through the waterproof tubing but I had to be careful to shape the "hook" so that it didn't snag on any existing cables:
- The PDF instructions for N52 engines are totally wrong for the next step. As others have noted, the pin they suggest that you connect to on the black 26-pin block is already occupied. You can just plug the blue cable directly into pin 39 of the grey 42-pin connector block, as Jamie has done. You don't need either of the blue or black repair cables:
- I thought I'd gotten away with not having removing the glove box, but I had to in the end. I couldn't find another way to push the saw-cut split pin on the upper edge of the lower trim panel into the dash. Without doing this the panel flaps around a bit (why they couldn't just have used another screw here, I have no idea!):
![Smile :)](./images/smilies/original.gif)
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone
2006 Z4 2.5si: gone
- Taz
- Lifer
- Posts: 19501
- Joined: Tue Jul 14, 2009 9:56 pm
- Location: Saddleworth
Re: Post 04 cruise control retrofit N52
I find it amazing that there is no visual display that its on
- Bing
- Legend
- Posts: 26514
- Joined: Sun Oct 02, 2011 7:19 pm
- Location: Exiled Scot in Maidstone
Re: Post 04 cruise control retrofit N52
What's that split pin for in your last pic MrPT ? Don't remember that from my install ![Confused :?](./images/smilies/unsure.gif)
![Confused :?](./images/smilies/unsure.gif)
Current... Silver Grey ///M Roadster, non-flimper spec, Imola Red nappa, permanent ear-to-ear grin ![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
- MrPT
- Lifer
- Posts: 4747
- Joined: Sun Oct 21, 2012 7:44 pm
- Location: Bucks/Oxon
It's part of the passenger side lower dashboard trim panel. The RHD version of this: http://www.realoem.com/bmw/showparts.do ... fg=30&hl=6 (although the pin is not actually included in that diagram, for some reason).Bing wrote:What's that split pin for in your last pic MrPT ? Don't remember that from my install
The box you can see just above it in my photo is the fuse box. On the edge of the panel closest to the passenger seat there is a screw near each corner. In the middle of the edge is a plastic split pin that pushes upwards into the fuse box cavity and through a hole in a square black plastic flap. Without it secured the panel sags a bit in the middle.
At least I think that's what it's for. :p
Sent from my GT-P6810 using Tapatalk 4
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone
2006 Z4 2.5si: gone
- Bing
- Legend
- Posts: 26514
- Joined: Sun Oct 02, 2011 7:19 pm
- Location: Exiled Scot in Maidstone
Re: Post 04 cruise control retrofit N52
MrPT, you may have just helped me sort another rattle out - happy days ![Very Happy :D](./images/smilies/biggrin.gif)
![Very Happy :D](./images/smilies/biggrin.gif)
Current... Silver Grey ///M Roadster, non-flimper spec, Imola Red nappa, permanent ear-to-ear grin ![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
- MrPT
- Lifer
- Posts: 4747
- Joined: Sun Oct 21, 2012 7:44 pm
- Location: Bucks/Oxon
Re: Post 04 cruise control retrofit N52
Hah... and sorting it the proper way, instead of randomly sticking bits of sticky felt everywhere, is always the best! I need to fix my vents/cupholders next - they rattle like a mofo.Bing wrote:MrPT, you may have just helped me sort another rattle out - happy days
Stalk was £70 and the wiring was £20. Both from Sopers - Jamie said quite a few kits have had the parts issue. Must have been the work experience kid.Taz wrote:how much is the kit these days?
![Rolling Eyes :roll:](./images/smilies/rolleyes.gif)
2008 Z4MC: heavy wheels | crap suspension | skittish rear end | wobbly engine | not enough induction noise | underwhelming turn in | inconsistent braking | lardy battery | chubby steering wheel
2006 Z4 2.5si: gone
2006 Z4 2.5si: gone
-
- Newbie
- Posts: 20
- Joined: Thu Aug 16, 2012 7:11 pm
Re: Post 04 cruise control retrofit N52
Next question, where do I get the kit from, BMW ?
- Bing
- Legend
- Posts: 26514
- Joined: Sun Oct 02, 2011 7:19 pm
- Location: Exiled Scot in Maidstone
Re: Post 04 cruise control retrofit N52
Call Sopers in Lincoln, ask for Jamie or Mark in Parts, mention the forum and you should get a 10%-ish discount! free P&P and very fast delivery
You will need the loom and the stalk if your car is a facelift.
Once you have the kit make sure - before you start - that you have both male and female connectors, as some people have received all male or all female which is a tad disappointing when you've already cut the wires![Exclamation :!:](./images/smilies/excl.gif)
![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
You will need the loom and the stalk if your car is a facelift.
Once you have the kit make sure - before you start - that you have both male and female connectors, as some people have received all male or all female which is a tad disappointing when you've already cut the wires
![Exclamation :!:](./images/smilies/excl.gif)
Current... Silver Grey ///M Roadster, non-flimper spec, Imola Red nappa, permanent ear-to-ear grin ![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
![Cool 8)](./images/smilies/cool.gif)
Previous... 3.0Si Sport Roadster, Black Sapphire, Dream Red leather with lots of toys and lots of mods...
-
- Member
- Posts: 120
- Joined: Sun Sep 21, 2014 9:01 am
Re: Post 04 cruise control retrofit N52
Hi just fit cruise con and all going well until last connection i have a cable running to pin 39 already in the grey conector
Can anyone help
Can anyone help
- nfbr
- Member
- Posts: 722
- Joined: Wed Aug 13, 2014 1:47 pm
- Location: Irlam, Manchester
- Contact:
Re: Post 04 cruise control retrofit N52
Mark, if you are confident that the cable/pin you are looking at is definitely pin39, then you can tap into that cable with your blue wire and it should work fine.mark anderson wrote:Hi just fit cruise con and all going well until last connection i have a cable running to pin 39 already in the grey conector
Can anyone help
![Image](http://i399.photobucket.com/albums/pp75/nfbr/nfbrsig_zpswmwm9l7q.jpg)
nfbr's 2007 BMW Z4 3.0si Sport Coupé - Car Diary/Blog/Build Thread
Ruby Black - Steptronic - Champagne Merino leather.
I like taking Photos, Cars, Technology and Rock Music
-
- Newbie
- Posts: 4
- Joined: Sat Dec 22, 2012 10:35 am
- Location: Worcestershire
Re: Post 04 cruise control retrofit N52
Thanks to Jamie Carpenter and others... just fitted CC to my 07 Z4C, helped by my elder son. it took us around 3 hours - mind you, it's not warm out there at this time of year. Quite a fiddle, I must say.
I soldered the 2 wires into the loom on the ligh-switch. And I used tin-snips to make the cut-out for the swtich in the column surround, tidying with a file.
Good post on pin-39 of the grey connector. Would be scratching my head at this point if I were to try to follow the BMW instructions.
Once again - thanks vm
Anthony
I soldered the 2 wires into the loom on the ligh-switch. And I used tin-snips to make the cut-out for the swtich in the column surround, tidying with a file.
Good post on pin-39 of the grey connector. Would be scratching my head at this point if I were to try to follow the BMW instructions.
Once again - thanks vm
Anthony
- nfbr
- Member
- Posts: 722
- Joined: Wed Aug 13, 2014 1:47 pm
- Location: Irlam, Manchester
- Contact:
Re: Post 04 cruise control retrofit N52
Just so we're all aware - you do not need to use the black repair wire. Just plug the cable straight in. Mine worked first time.
I did away with the crappy connectors for the power feeds too and soldered directly to the wires behind the light switch, isolated with heat shrink tubing, then taped back up with cloth looming tape.
Beautiful OEM finish![Smile :)](./images/smilies/original.gif)
I did away with the crappy connectors for the power feeds too and soldered directly to the wires behind the light switch, isolated with heat shrink tubing, then taped back up with cloth looming tape.
Beautiful OEM finish
![Smile :)](./images/smilies/original.gif)
![Image](http://i399.photobucket.com/albums/pp75/nfbr/nfbrsig_zpswmwm9l7q.jpg)
nfbr's 2007 BMW Z4 3.0si Sport Coupé - Car Diary/Blog/Build Thread
Ruby Black - Steptronic - Champagne Merino leather.
I like taking Photos, Cars, Technology and Rock Music