Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Fitting 19" Alloys to a 3.0Si

Alloy wheels and tyre discussion
User avatar
Mark-Z4
Senior Member
Senior Member
Posts: 1097
Joined: Wed Apr 03, 2013 10:23 pm
Location: South West

Fitting 19" Alloys to a 3.0Si

Post by Mark-Z4 » Mon Aug 05, 2013 6:44 pm

I am looking at getting a new set of wheels, but I have a few questions...

How do 19s feel on the car? Any problems or disadvantages?

The size of the wheels are 19 x 8.5 front and 19 x 9.5 rear. Any issues with these sizes?

With fitting the larger wheels the car is going to look higher off the ground, so the plan is to get the Eibach Pro Kit springs with a 30mm front and 20mm rear drop. Is there any risk of scrubbing on the arches?

Thanks

Mark
E86 - Space Grey | Grey Oregon Pearl Leather | Sport Interior | ///M Bumper | Aero Skirts | Piano Black Trim | ///M Wheel | Eibach Pro | CSL | HID | LED | ZHP | MM Tips | Stubby SOLD

Dav the wheel nut
Lifer
Lifer
Posts: 3066
Joined: Sun Mar 07, 2010 3:40 pm
Location: Somerset

Re: Fitting 19" Alloys to a 3.0Si

Post by Dav the wheel nut » Mon Aug 05, 2013 7:07 pm

Mark-Z4 wrote:I am looking at getting a new set of wheels, but I have a few questions...

How do 19s feel on the car? Any problems or disadvantages?

The size of the wheels are 19 x 8.5 front and 19 x 9.5 rear. Any issues with these sizes?

With fitting the larger wheels the car is going to look higher off the ground, so the plan is to get the Eibach Pro Kit springs with a 30mm front and 20mm rear drop. Is there any risk of scrubbing on the arches?

Thanks

Mark
Mark I am running on the same size wheels lowered on eibachs without any issues. The important point is, what are the offsets of the wheels and what width tyres do you intend to run?
My offsets are 35 front and rear and the tyres are 225/35/19 fronts and 265/30/19 rears.
I'm not so sure the car will look any higher off the ground because the tyres have a lower profile than those on 18s.
Got any wheels in mind? As long as you fit non runflat tyres the ride quality is fine.

Image

Z4M-2006
Lifer
Lifer
Posts: 7020
Joined: Fri Jun 29, 2012 7:53 am
Location: High Peak,Derbyshire.

Re: Fitting 19" Alloys to a 3.0Si

Post by Z4M-2006 » Mon Aug 05, 2013 7:08 pm

I fitted 19" CSL's on my 3.0SI coupe without problem,although like you say it needed lowering.

I thought the Eibach kit was 30mm on the rear though ?

User avatar
mr wilks
Legend
Legend
Posts: 21894
Joined: Wed Jul 04, 2012 10:02 pm
Location: Lancashire

Re: Fitting 19" Alloys to a 3.0Si

Post by mr wilks » Mon Aug 05, 2013 7:09 pm

Mark-Z4 wrote:I am looking at getting a new set of wheels, but I have a few questions...

How do 19s feel on the car? Any problems or disadvantages?

The size of the wheels are 19 x 8.5 front and 19 x 9.5 rear. Any issues with these sizes?

With fitting the larger wheels the car is going to look higher off the ground, so the plan is to get the Eibach Pro Kit springs with a 30mm front and 20mm rear drop. Is there any risk of scrubbing on the arches?

Thanks

Mark
Not sure the car will be noticeably higher off the ground ? The idea is when the wheel size goes up the tyre size goes down so keeping the overall rolling radius the same /
Pm Z4M-2006 , , ,he,s done the same as you plan on his last 3 Z,s with little or no issues :thumbsup:
3 ZMRs
3 E89s
5 Si coupes
5 Si roadsters
997 C4
TTRS
F82 M4
MK7 Golf Gti
current Bmw 6 Gran Turismo

Dav the wheel nut
Lifer
Lifer
Posts: 3066
Joined: Sun Mar 07, 2010 3:40 pm
Location: Somerset

Re: Fitting 19" Alloys to a 3.0Si

Post by Dav the wheel nut » Mon Aug 05, 2013 7:21 pm

mr wilks wrote:Not sure the car will be noticeably higher off the ground ? The idea is when the wheel size goes up the tyre size goes down so keeping the overall rolling radius the same /
Pm Z4M-2006 , , ,he,s done the same as you plan on his last 3 Z,s with little or no issues :thumbsup:
Didn't I just say all that :poke:

User avatar
mr wilks
Legend
Legend
Posts: 21894
Joined: Wed Jul 04, 2012 10:02 pm
Location: Lancashire

Re: Fitting 19" Alloys to a 3.0Si

Post by mr wilks » Mon Aug 05, 2013 7:25 pm

Dav the wheel nut wrote:
mr wilks wrote:Not sure the car will be noticeably higher off the ground ? The idea is when the wheel size goes up the tyre size goes down so keeping the overall rolling radius the same /
Pm Z4M-2006 , , ,he,s done the same as you plan on his last 3 Z,s with little or no issues :thumbsup:
Didn't I just say all that :poke:
I,m a slow writer :poke:
3 ZMRs
3 E89s
5 Si coupes
5 Si roadsters
997 C4
TTRS
F82 M4
MK7 Golf Gti
current Bmw 6 Gran Turismo

User avatar
Mark-Z4
Senior Member
Senior Member
Posts: 1097
Joined: Wed Apr 03, 2013 10:23 pm
Location: South West

Re: Fitting 19" Alloys to a 3.0Si

Post by Mark-Z4 » Mon Aug 05, 2013 7:51 pm

Thanks for the replys.


At the moment the wheels I am most interested in are CS (CSL Reps) Y Spoke alloys with the extra deep dish on the rear. Done to death yes but look very natural on the Z4. They have an offset of 19" x 8.5" et38 front and 19" x 9.5" et45 rear.

I don't really know much about offset etc but the CS alloys are listed on BM Autosport as Z4 E85/86 fitment.

The other wheels I like are the BBS CX-R, but they expensive before even fitting tyres.


Tyre sizes i have looked at are 235/35/19 front and 265/30/19 rear. Not sure on which tyres yet, I'm going to give non-run flats a go I think.
E86 - Space Grey | Grey Oregon Pearl Leather | Sport Interior | ///M Bumper | Aero Skirts | Piano Black Trim | ///M Wheel | Eibach Pro | CSL | HID | LED | ZHP | MM Tips | Stubby SOLD

Marius
Senior Member
Senior Member
Posts: 1775
Joined: Sun Aug 12, 2012 12:01 pm
Location: west sussex
Contact:

Re: Fitting 19" Alloys to a 3.0Si

Post by Marius » Mon Aug 05, 2013 8:22 pm

Image

19x9 front, 19x10 rear, no rubbing at all :!:

User avatar
Mark-Z4
Senior Member
Senior Member
Posts: 1097
Joined: Wed Apr 03, 2013 10:23 pm
Location: South West

Re: Fitting 19" Alloys to a 3.0Si

Post by Mark-Z4 » Mon Aug 05, 2013 8:33 pm

:lol: If you have no issues then I definitely won't.
E86 - Space Grey | Grey Oregon Pearl Leather | Sport Interior | ///M Bumper | Aero Skirts | Piano Black Trim | ///M Wheel | Eibach Pro | CSL | HID | LED | ZHP | MM Tips | Stubby SOLD

Z4M-2006
Lifer
Lifer
Posts: 7020
Joined: Fri Jun 29, 2012 7:53 am
Location: High Peak,Derbyshire.

Re: Fitting 19" Alloys to a 3.0Si

Post by Z4M-2006 » Mon Aug 05, 2013 8:36 pm

Marius wrote:Image

19x9 front, 19x10 rear, no rubbing at all :!:

What tyres ?

User avatar
mr wilks
Legend
Legend
Posts: 21894
Joined: Wed Jul 04, 2012 10:02 pm
Location: Lancashire

Re: Fitting 19" Alloys to a 3.0Si

Post by mr wilks » Mon Aug 05, 2013 8:39 pm

The X5 Y spokes look really well Marius :thumbsup: bold move but a great look 8)
3 ZMRs
3 E89s
5 Si coupes
5 Si roadsters
997 C4
TTRS
F82 M4
MK7 Golf Gti
current Bmw 6 Gran Turismo

StigJ
Member
Member
Posts: 586
Joined: Tue May 04, 2010 8:58 am
Location: Sola, Norway

Re: Fitting 19" Alloys to a 3.0Si

Post by StigJ » Mon Aug 05, 2013 9:40 pm

Marius wrote:Image

19x9 front, 19x10 rear, no rubbing at all :!:
I guess you have no rubbing because of the massive tire stretch. You've got pretty nice poke to them too. And you are even lower than my Coupe.

Im on H&R with M-Tech shocks.
I run 8.5x19" ET34 with 235/35 Michelin PSS. Before I got my adjustable camberplates it rubbed like hell. I have huge holes in the plastic covers in the wheelwells.
In the rear I run 10x19 ET41 w/265/30. No problems there.

I will go down to 18" next year just to get lighter wheels.
The first year I used 17" with 225/45 for track use. The car was sitting lower with those wheels than with the 19s.

The 17s.
Image

The 19s.
Image
Image
Hellrot '06 BMW Z4 Coupe 3.0si
Instagram: @StigJ77 & @bmwe86driver

User avatar
Mark-Z4
Senior Member
Senior Member
Posts: 1097
Joined: Wed Apr 03, 2013 10:23 pm
Location: South West

Re: Fitting 19" Alloys to a 3.0Si

Post by Mark-Z4 » Mon Aug 05, 2013 9:51 pm

Z4M-2006 wrote:I fitted 19" CSL's on my 3.0SI coupe without problem,although like you say it needed lowering.

I thought the Eibach kit was 30mm on the rear though ?
Listed as 20mm for the E86 rear on the Eibach site...
http://eibach.suspensiondirect.co.uk/BM ... -3.0si.jsp

How much did you lower by and did it effect the camber at all?
E86 - Space Grey | Grey Oregon Pearl Leather | Sport Interior | ///M Bumper | Aero Skirts | Piano Black Trim | ///M Wheel | Eibach Pro | CSL | HID | LED | ZHP | MM Tips | Stubby SOLD

StigJ
Member
Member
Posts: 586
Joined: Tue May 04, 2010 8:58 am
Location: Sola, Norway

Re: Fitting 19" Alloys to a 3.0Si

Post by StigJ » Mon Aug 05, 2013 10:05 pm

If I remember correctly it loweres 35mm f/r.

This is with my old 9x19 ET44 w/255/30 and the OEM M-Tech suspension.
Image

Here its just lowered and no alignment done yet.
Image
Image

Now it sits like this.
Image
Image
Hellrot '06 BMW Z4 Coupe 3.0si
Instagram: @StigJ77 & @bmwe86driver

Marius
Senior Member
Senior Member
Posts: 1775
Joined: Sun Aug 12, 2012 12:01 pm
Location: west sussex
Contact:

Re: Fitting 19" Alloys to a 3.0Si

Post by Marius » Tue Aug 06, 2013 9:52 am

Z4M-2006 wrote:
Marius wrote:Image

19x9 front, 19x10 rear, no rubbing at all :!:

What tyres ?
225/35 front 235/35 rear, front offset et25, rear et20

Sent from my Xperia Arc S using Tapatalk 4

Post Reply