setting clock

zforce · Post by **zforce** » Mon Nov 05, 2007 6:26 am

I know this sounds stupid but my wife and I purchased a 03 Z-4 about 2 months ago and now with the time change I can't figure out how to change time and seems nothing in owners packet.She has the factory in dash CD.Please help and thanks.

Citation 650 · Post by **Citation 650** » Mon Nov 05, 2007 7:13 am

Page 48 of the 2003 manual:

To adjust
Ignition key in position 1 or higher:

Hours
1. Keep button 2 pressed for several seconds
until the hours are displayed and
the colon flashes
2. Press button 1 repeatedly until the
required hour is set

Minutes
3. Press button 2 to switch to the minutes
display
4. Press button 1 repeatedly until the
required minutes are set
5. Press button 2 to confirm the settings.
The set time of day is transferred to the car
radio display or appears in the instrument
cluster display.
Display mode
In ignition key position 0:
Press button 1.
The time of day is displayed for several
seconds.

zforce · Post by **zforce** » Mon Nov 05, 2007 8:47 am

Thanks for your help.I new it had to be simple.

ovrkll · Post by **ovrkll** » Mon Nov 05, 2007 10:34 am

Thanks for the reminder to those of us that forgot, also!

Cheers!

PaulN · Post by **PaulN** » Mon Nov 05, 2007 2:00 pm

LoL

Just done mine too, was playing with it on the way to work but thought it was best to watch the road.....

Cheers

PaulN

rosierobins · Post by **rosierobins** » Mon Nov 05, 2007 5:38 pm

yah, i started fiddling with those 2 buttons as I was driving and it flashed "RESET" which scared the heck outta me. I just stopped and restarted the car and it seemed to forget the button I pushed.....I think.

I will do it your way now.

Rosie

Aebous · Post by **Aebous** » Tue Nov 06, 2007 3:55 pm

Yeah I hadn't gotten around to changing mine yet. Was fixing to take a peek at the bible myself.

561design · Post by **561design** » Tue Nov 06, 2007 4:06 pm

LOL make this a sticky. I forgot how to do mine as well.

Post by **sp3ctre** » Tue Nov 06, 2007 4:36 pm

if only there was a search function on this forum:

http://www.z4-forum.com/forum/viewtopic.php?f=12&t=185

ovrkll · Post by **ovrkll** » Wed Nov 07, 2007 4:36 pm

sp3ctre wrote:if only there was a search function on this forum:

http://www.z4-forum.com/forum/viewtopic.php?f=12&t=185

IK. · Post by **IK.** » Mon Mar 30, 2009 5:59 pm

I've tried this, and it hasn't worked. Tried it in positions 0, 1, 2, and 3. I press button 2 for ages, and nothing happens.

Smokin · Post by **Smokin** » Mon Mar 30, 2009 6:08 pm

should work, mine's an 07 and it works as stated.

Button 2 is your oil check button. Turn ignition switch on but don't start the car. Press 2, hours will start to flash. etc, etc.

IK. · Post by **IK.** » Mon Mar 30, 2009 6:09 pm

Yep, that's correct, it's the oil one; but still doesn't work. Not sure why!

jamesdean · Post by **jamesdean** » Mon Mar 30, 2009 7:19 pm

Make sure it's displaying the clock before you do it?

RichardG · Post by **RichardG** » Mon Mar 30, 2009 7:28 pm

I was going to point out that in mine you have to have the time on the radio aswell to change it, but was beaten to it.

on a slightly different note does anyone know if you can get the time to display if you fit an aftermarket HU.

Z4-forum.com

setting clock

setting clock

setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock

Re: setting clock