If anyone bought the cable allready made up and no aux appears add the resistor and capacitators like sk93 shows and AUX should appear. Atleast they did for me.
![Driving :driving:](./images/smilies/smilie_driving.gif)
Nope, tried with two ipods and get same thing... and yes, but I get no source to the sub. It works fine with the radio, just not with aux cable.sk93 wrote:ipods EQ set to spoken word or similar?
i assume you've checked the bass setting for aux on the radio?
I tried all combinations of those pins... the red and blue wires have to be in slots 3,4. if i put the brown one in it, i dont get aux at all. I refered to that diagram 30 different times, I believe they need to be 3,4,10. but what I was saying was in the picture it looks like 3,4,9.sk93 wrote:it could be that you've got the left/right chanels the wrong way around?
The pins are definately 3,4 & 10. see here:
http://www.z4-forum.com/forum/viewtopic ... 30#p237084
You're forgetting to count the two pins that sit outside of that plug! (left side of the plug as you look at in that picture).Kaide wrote:but what I was saying was in the picture it looks like 3,4,9.
Doh!sk93 wrote:You're forgetting to count the two pins that sit outside of that plug! (left side of the plug as you look at in that picture).Kaide wrote:but what I was saying was in the picture it looks like 3,4,9.
I'm not 100% convinced the cable is the faultKaide wrote:However, still doesnt fix my issue.... Looks like even after I paid for the cable i'm going to have to make my own anyway