FOR SALE E89 cup and drink bottle holders - custom design

For Sale
N

Nathanio

Member
 West Sussex
Hi All,

I've created a set of cup holders for the E89 as the options are limited. Designed for 12 / 18Oz Yeti Rambler bottles and recently added some extra storage options.

I designed it from scratch and been iterating the design since. Not everyone has a 3D printer and so I am offering to print it for people.

I'm selling them on eBay for peoples piece of mind.
PXL_20250203_061732063.jpg
WhatsApp Image 2025-02-09 at 12.30.26_939d43b9.jpg
IMG-20250119-WA0005.jpg

Original dual cup holder: https://www.ebay.co.uk/itm/157186445617
Upgrade kit with additional storage: https://www.ebay.co.uk/itm/156685872195
Full kit with additional storage: https://www.ebay.co.uk/itm/157239200556
Double phone holder option for the full kit: https://www.ebay.co.uk/itm/167562455242

Thanks
 
Last edited:
Thats a really good drinks unit you’ve created there. One hole for my drink and the other for my sweets :thumbsup:
 
Just want to chime in and say I bought one of these through eBay back in November. Excellent quality and design. A side note, it convinced me to purchase a 3D printer of my own, that’s how impressed I was with it.
 

Attachments

  • IMG_1624.jpeg
    IMG_1624.jpeg
    189.2 KB · Views: 1,237
Thanks all for your kind words.

I've sold nearly 50 kits for E89 enthusiasts :-)

Updated links:

https://www.ebay.co.uk/itm/156936982043 CORAL RED colour full kit with extra storage. Currently printing the first one for someone. Will upload pictures later
https://www.ebay.co.uk/itm/156919840506 original kit
https://www.ebay.co.uk/itm/156685852182 full kit in black
 
I was going to buy this month but then had to get some stuff for my Z3, so next month maybe. Black is new..a dilemma..that or the original 🤔
 
Bombur said:
I was going to buy this month but then had to get some stuff for my Z3, so next month maybe. Black is new..a dilemma..that or the original 🤔
Click to expand...

They are custom printed to order and I always keep the black in stock. I used to use a grey / black colour but the supplier stopped doing it. I swapped to a different supplier and it's much better than the previous. The red is the same supplier but subtly different material.

I've just had to spend £550 on my Z4, it wasn't even 0 months between needing money spending on it :?
 
Nathanio said:
Thanks all for your kind words.

I've sold nearly 50 kits for E89 enthusiasts :-)

Updated links:

https://www.ebay.co.uk/itm/156936982043 CORAL RED colour full kit with extra storage. Currently printing the first one for someone. Will upload pictures later
https://www.ebay.co.uk/itm/156919840506 original kit
https://www.ebay.co.uk/itm/156685852182 full kit in black
Click to expand...
Thanks for updating the links - just placed an order for the original kit :thumbsup:
 
Just wanted to say thanks Nathan the drinks holder arrived yesterday - well packaged and looked very good quality.

20250509_091555.jpg20250509_091606.jpg

The fitting process was very straightforward.

20250509_092430.jpg20250509_092757.jpg

And I am very impressed with the functionality.

20250509_093931.jpg20250509_105644.jpg

My main concern was that it would impact the use of the storage net but it didn't detract from it's use at all :thumbsup:

20250509_093339.jpg
 
Thank you for the feedback. It took many iterations to get it correct and the fitment right.

It's always good to get positive feedback and people appreciating the effort that has gone into it.
 
Nathanio said:
Thank you for the feedback. It took many iterations to get it correct and the fitment right.

It's always good to get positive feedback and people appreciating the effort that has gone into it.
Click to expand...
I put some photos up on the Zroadster forum and on the E89 Facebook group - I know at least one member placed an order from the forum and had a lot of interest from the Facebook group but suspect most of the 15k members are US based. Apologies if you don't post outside UK. :thumbsup:
 
Gwest44 said:
Nathanio said:
Thank you for the feedback. It took many iterations to get it correct and the fitment right.

It's always good to get positive feedback and people appreciating the effort that has gone into it.
Click to expand...
I put some photos up on the Zroadster forum and on the E89 Facebook group - I know at least one member placed an order from the forum and had a lot of interest from the Facebook group but suspect most of the 15k members are US based. Apologies if you don't post outside UK. :thumbsup:
Click to expand...
I have changed to international (mostly!) and sold to several EU countries, Aus and the US
 
Nathanio said:
Shorter bottom base plate now available on the original design for those with ski hatch preperation.
Click to expand...
New size is spot on.

New one

20250519_143234.jpg20250519_143209.jpg

Difference
20250519_142505.jpg20250519_142306.jpg
Old one
20250515_154615.jpg20250515_142235.jpg
 
New listing ID for the full kit as all of them had been bought.

Shorter version also available for the full kit.
 
You must log in or register to reply here.
Back
Top Bottom