- Screen Shot 2024-02-26 at 11.51.47 AM.png (69.13 KiB) Viewed 190 times
- Screen Shot 2024-02-26 at 11.52.55 AM.png (81.69 KiB) Viewed 190 times
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Carbon Intake Tube / Update!
-
solo_the_lad
- Member
- Posts: 83
- Joined: Tue May 02, 2023 8:20 pm
- Location: Colorado, USA
Carbon Intake Tube / Update!
Just wanted to update any folks that were interested in this process. For anyone that is unaware, I'm in the works of developing a carbon intake tube that will replace the stock tube on the N52 motor. The aftermarket part will have no resonator box and will be totally smooth inside, reducing air flow disruption created by the baffles of the OE part. I've completed the 3D modeling of it, next will be to send this model to a company that can produce a high quality split mold for me.
3.0i z4, every aero mod on the planet, stage 3 intake swap + tune. Remember guys, you can't fail if you don't try. 
-
Barty
- Senior Member
- Posts: 1055
- Joined: Mon Aug 09, 2021 5:02 pm
- Location: Netherlands
Carbon Intake Tube / Update!
Nice! Interesting to see how this pans out
Four Alfa's and a Ducati later, I've turned to the dark side...
"Drive German, wear Italian, kiss French"
Z4: Tiefgrüen Metallic E86 3.0Si / Insta @bartsbuilds
"Drive German, wear Italian, kiss French"
Z4: Tiefgrüen Metallic E86 3.0Si / Insta @bartsbuilds