Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

⌛ Prepare E88 hall sensors for E89 use

How-To articles are in here.
Post Reply
User avatar
RobbiZ4
Senior Member
Senior Member
Posts: 1243
Joined: Wed May 16, 2018 10:12 am
Location: Munich
Contact:

⌛ Prepare E88 hall sensors for E89 use

Post by RobbiZ4 » Sat Feb 17, 2024 4:08 pm

E89 hall sensors (HS) on the hydraulic rams are very expensive as spare parts. Alternatively, E88 hall sensors can be fitted. These HS use the same housing format, but are supplied without connectors.

What is required:
  • 2 MQS female pins per HS
  • A MQS crimp tool
Preparing these E88 hallsensors is easy going: 8) :?
  • Remove the zip tie from the hydraulic ram, that fixes the rear hall sensors plug. Take a photo before removing it!
  • Both hall sensors are clipped into the right hydraulic ram in the trunk. You can unmount it by pushing a tiny screwdriver between the ram and the HS housing
  • Shorten the 2 wires of each new hall sensor according to the lenghts of the old hall sensors, they are different
  • Crimp a new pin on each wire
  • Twist both wires to get the wiring a bit more compact
  • Plug both wires into a new housing.
  • Important: pin orientation is according to he old hall sensors - brown to brown, colour to colour!!. One old HS has a yellow wire, the new one is red. Don't mind, just colour to colour
  • Don't forget to place a new zip tie sorrowly(!) around the hydraulic ram to fix the plug and the 2x2 wires as initially removed
Pardon, je suis Allemand :oops:
:ant:
E89 Roof Maintenance
viewtopic.php?t=130932

Y3 Roof Diagnostic System
viewtopic.php?f=23&t=129048
Image

User avatar
B21
Lifer
Lifer
Posts: 5376
Joined: Tue Oct 05, 2021 7:15 pm
Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia

⌛ Prepare E88 hall sensors for E89 use

Post by B21 » Sat Feb 17, 2024 6:39 pm

Good to know..thnx :thumbsup:
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is :thumbsup:

Online
flybobbie
Lifer
Lifer
Posts: 4034
Joined: Sat May 25, 2013 8:27 pm
Location: Stourbridge

⌛ Prepare E88 hall sensors for E89 use

Post by flybobbie » Sun Feb 18, 2024 12:15 am

Mini Hall sensor same also.
Cheap, don't get wool pulled over eyes.
https://www.lllparts.co.uk/product/5434 ... all-sensor

Post Reply