MS45.0 tuning

I did some digging through the latest Datens for the E85 and it looks like you can flash BO2S so your probably best doing that, at least then you can use the existing XDF.

Get Winfkp up and running, then do a ZUSB update and re-read the ECU.
 
Mine has literally other adjustments which is not making sense
 

Attachments

  • IMG_EE72680D-9D28-40C1-A68C-1F5F40FB0574.jpeg
    IMG_EE72680D-9D28-40C1-A68C-1F5F40FB0574.jpeg
    143.9 KB · Views: 1,816
I’m not the same guy, I tuned my car I’ve done everything except the rpms which I want to increase them so bad any ideas ? Or if I can attach my tune over here and somones to check it for me if it’s possible please
 
I am an old bloke with a lot of motoring knowledge and I have to ask why would you ever contemplate tuning a 20 lyear old car which is normally aspirated. Unless you go the turbo route there is no point. BMW did a good job in designing these cars, trying to squeeze extra hp will just knacker the car.
 
I know but to boost it a bit and to increase the rpms from 6550 to 6800 with the proper service maintenance I don’t think it’s gonna break
 
You must log in or register to reply here.
Back
Top Bottom