Torque settings

Justino · Post by **Justino** » Sun Apr 02, 2023 11:22 pm

Is there an online document that easily shows torque settings for bolts?

I am in the process of refurbing the rear brakes, new discs, handbrake shoes etc, so so want to make sure everything is put back at the correct settings.

cheers

ronk · Post by **ronk** » Mon Apr 03, 2023 2:12 pm

This is what I use:-

Wheel Studs
M12 = 120 +/-10 Nm

Justino · Post by **Justino** » Mon Apr 03, 2023 8:31 pm

thanks, I am after various, eg caliper slide bolts, caliper retainer bracket, disk retainer screw etc etc. Must be a source somewhere?

j3nks79 · Post by **j3nks79** » Mon Apr 03, 2023 8:35 pm

Just do them FT

Wassup · Post by **Wassup** » Mon Apr 03, 2023 10:53 pm

I have a pdf file with torque specs for the E46 M3 which is pretty useful as the z4m shares many components with the M3. Send me a pm with your email address and I'll happily share.

Justino · Post by **Justino** » Tue Apr 04, 2023 12:01 am

Thanks.

I think they are all on the BMW TIS which I just remembered I have a copy. Will take a look once back at a PC

Slideways · Post by **Slideways** » Sun Apr 09, 2023 7:03 am

Torque specs for E46 M3 that was mentioned in the post above - https://drive.google.com/file/d/1NMIF3n ... 9AptZ/view

The specs are from the BMW TIS and the TIS is available online as well.

Z4-forum.com

Z4-forum.com

Torque settings

Torque settings

Torque settings

Torque settings

Torque settings

Torque settings

Torque settings

Torque settings