What coding can code out PDC ?
I have an E86 but previously it had a rear bang and replaced rear end it does not have the sensor holes drilled but it does have the original PDC module still installed. I would like to remove that by coding.
When going in reverse it gives the long beep signifying an error with the PDC. My BMW mechanic says cant code out with BMW coding as alters the factory setup and to research others around or on forum.
Just looking to buy whatever coding that will do this specific job of removing PDC from the car ?
Cheers
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
What coding can code out PDC ?
- Rockhopper
- Senior Member
- Posts: 1116
- Joined: Fri Mar 06, 2020 7:05 pm
- Location: Mansfield
What coding can code out PDC ?
Just unplug the module. Its behind the panel under the steering wheel.
- B21
- Lifer
- Posts: 5457
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
What coding can code out PDC ?
You will need ISTA on a laptop to remove PDC from the VO and CAS along with unplugging/ remove the PDC module and that will for sure sort it.
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
-
- Member
- Posts: 103
- Joined: Sun Aug 22, 2021 9:30 pm
What coding can code out PDC ?
@B21 can you give me more Info in ISTA ? And VO & CAS ? I’ve not used before but comfortable with some info on the process , cheers
-
Onlinesmorris_12
- Member
- Posts: 902
- Joined: Mon Apr 18, 2022 2:14 pm
- Location: Somerset
What coding can code out PDC ?
Disconnect the (single wire?) plug going into the gong?
------
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
Scott
Where are we going and why am I in this handbasket?
2006 Z4 2.5si Silbergrau und rot
-
- Member
- Posts: 103
- Joined: Sun Aug 22, 2021 9:30 pm
What coding can code out PDC ?
Disconnecting the module won’t stop the error beep going into reverse I need to code it out first
- B21
- Lifer
- Posts: 5457
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
What coding can code out PDC ?
ISTA is the old BMW’s own s/w suite…freely available to download from various sites,, about as user friendly as a cornered rat…but..very ca-able..
VO and CAS are vehicle order and car access system…the car ‘knows’ what parts are fitted by checking with the VO and CAS..if you remove the entries in VO and CAS then the car will not ‘know’ they exist..with the proviso that if the h/w is still connected then the car may be ‘perplexed’ as to data comi g from a unit it doesn’t know about..
ISTA allows you to edit the CAS and VO as well as many many other things…like all the diagnostics and instructions on how to do almost everything to the car…
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
-
- Member
- Posts: 103
- Joined: Sun Aug 22, 2021 9:30 pm
What coding can code out PDC ?
Great explanation , appreciated will focus on this, cheers