Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Handbrake adjustment
-
- Member
- Posts: 86
- Joined: Wed Jun 16, 2021 11:17 am
Handbrake adjustment
Hi all, the handbrake on my E85 goes all the way up to the top of its range but won’t hold the car too well, any links to how-to-videos so I can adjust it? Thanks in advance.
- oldgitdave
- Senior Member
- Posts: 1505
- Joined: Sun Jul 30, 2017 8:47 pm
- Location: Derbyshire
Handbrake adjustment
Here you go: https://www.pelicanparts.com/techarticl ... usting.htmMarkG - E85 wrote: ↑Sun Jun 27, 2021 9:05 pm Hi all, the handbrake on my E85 goes all the way up to the top of its range but won’t hold the car too well, any links to how-to-videos so I can adjust it? Thanks in advance.
Zedless
- TheDan
- Member
- Posts: 627
- Joined: Wed Aug 19, 2020 1:58 pm
- Location: Warwick, UK
Handbrake adjustment
Sorry to hijack your thread slightly but its on the same topic...
I just replaced the handbrake shoes and need to make this adjustment. I have read the Pelican parts procedure and wonder what the function of the cable service lock is? And if its really necessary to do that when adjusting the shoes?
I just replaced the handbrake shoes and need to make this adjustment. I have read the Pelican parts procedure and wonder what the function of the cable service lock is? And if its really necessary to do that when adjusting the shoes?
-
- Member
- Posts: 86
- Joined: Wed Jun 16, 2021 11:17 am
Handbrake adjustment
Cheers Old Git, looks like I'm busy this weekend.
- tomrdy
- Member
- Posts: 492
- Joined: Tue Jun 26, 2018 9:16 am
- Location: Sydney, Australia
Handbrake adjustment
It just takes the tension off cable. In the past I've always locked it - its simple so why not - as instructed.TheDan wrote: ↑Sun Jun 27, 2021 11:17 pm Sorry to hijack your thread slightly but its on the same topic...
I just replaced the handbrake shoes and need to make this adjustment. I have read the Pelican parts procedure and wonder what the function of the cable service lock is? And if its really necessary to do that when adjusting the shoes?
One piece of advice, make sure youre rotating the adjuster the right direction. If you can't seem to flick it through the hole, double... triple... quadruple check you're doing it in the right direction before applying liberal force with a flathead and hammer.
Without going into anymore detail (is there any more?) I ended up needing to remove my whole assembly to unseize the adjuster
-SOLD- Nardo grey 2004 Z4 3.0i E85
-SOLD- 2016 Long Beach Blue M2 DCT
-Wishing- Z4MC Interlagos blue...
___
Australia
-
- Member
- Posts: 86
- Joined: Wed Jun 16, 2021 11:17 am
Handbrake adjustment
Hi again, I’ve got my handbrake cover off but the service spring/adjuster already appears to be engaged I.e. it’s already been pushed in and locked off as there is a hook showing through the hole. I’ve tried releasing it but it won’t spring back even though the hook moves freely to the side. Am I looking at right?
- Attachments
-
- 3999460C-1544-4D45-B7C2-F698CF355A5B.jpeg (127.72 KiB) Viewed 756 times
- jamiecarpenter
- Member
- Posts: 312
- Joined: Sat May 23, 2009 10:11 am
- Location: Coventry
Handbrake adjustment
I found it hader to release it than engage it. I found pushing it more to the left as you push it back helped. It day take me about 10 minutes
Silver Grey 3.0 si 06. Retrofitted sat nav, Cruise Control, Intravee, Door Cards and Heated Seats.
-
- Member
- Posts: 86
- Joined: Wed Jun 16, 2021 11:17 am
Handbrake adjustment
The odd part is that the hook isn’t taking any tension, the hook moves left and right freely but the spring won’t push forward and take the hook back into the recess. It’s as if the spring tensioner has seized in the engaged position if that makes sense? Has anyone else ever encountered this?
If you look in the photo I posted, the hook has got a green bit of paint on it, this can be moved to the left easily so that it is positioned over the hole, yet the tensioner won’t spring forward.
If you look in the photo I posted, the hook has got a green bit of paint on it, this can be moved to the left easily so that it is positioned over the hole, yet the tensioner won’t spring forward.
-
- Member
- Posts: 100
- Joined: Mon Aug 26, 2013 2:35 pm
- Location: Aberdeenshire
Handbrake adjustment
MarkG did you ever get resolution on this, I have the same problem ?
-
- Member
- Posts: 86
- Joined: Wed Jun 16, 2021 11:17 am
Handbrake adjustment
I didn't but i managed to get the handbrake working as it had just become detached from the actuator on the actual shoes.
- colb
- Senior Member
- Posts: 1645
- Joined: Wed Nov 13, 2019 9:45 pm
- Location: Newport, South Wales UK
Handbrake adjustment
If the spring latch won't disengage I would hazard a guess that the shoes have been overadjusted at the wheel end, slacken them off and start again with the adjustments as per Pelican Parts instructions guide. Pay particular attention to how many turns back you have to do to achieve the required clearance, once set release the spring adjuster latch so it trakes up the slack at the handbrake lever end. Setting and releasing the latch can be done with a flat blade screwdriver but you can get a special tool on ebay that assists if you have trouble using a screwdriver.
https://www.ebay.co.uk/itm/164687349179 ... R57NkMuYYQ
https://www.ebay.co.uk/itm/164687349179 ... R57NkMuYYQ
Z Shed Cymru member
1999 1.8 Z3
2003 2.5 Z4
1998 Honda Deauville 650
If the forum helped you, why not help the forum back. Thats the Z4 way!
https://www.paypal.com/cgi-bin/webscr?c ... source=url
1999 1.8 Z3
2003 2.5 Z4
1998 Honda Deauville 650
If the forum helped you, why not help the forum back. Thats the Z4 way!
https://www.paypal.com/cgi-bin/webscr?c ... source=url