Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
EcuWorx remap for Z4M
- Martyn
- Member
- Posts: 203
- Joined: Mon Nov 25, 2013 9:41 pm
- Location: Poole, Dorset
- Contact:
EcuWorx remap for Z4M
Continued testing my AlphaN tune, but switched over to a GSR box. As some of you know the boxes are made to fit the E46 M3 and not the Z4M so the snorkle piece doesn't fit.
I initially hacked the snorkle up a bit to give it the clearance but decided a better solution would be to design and 3d print my own version.
Hoping to get some dyno time soon so I can finalise the tuning side.
I initially hacked the snorkle up a bit to give it the clearance but decided a better solution would be to design and 3d print my own version.
Hoping to get some dyno time soon so I can finalise the tuning side.
-
- Newbie
- Posts: 26
- Joined: Tue Apr 12, 2022 9:49 pm
EcuWorx remap for Z4M
Hi, any news on mss70 mod tool?
-
- Member
- Posts: 194
- Joined: Mon May 28, 2012 11:08 pm
EcuWorx remap for Z4M
How are you getting on with the 3d printed inlet - looks a neat solution?Martyn wrote: ↑Wed Jun 29, 2022 3:42 pm Continued testing my AlphaN tune, but switched over to a GSR box. As some of you know the boxes are made to fit the E46 M3 and not the Z4M so the snorkle piece doesn't fit.
I initially hacked the snorkle up a bit to give it the clearance but decided a better solution would be to design and 3d print my own version.
Hoping to get some dyno time soon so I can finalise the tuning side.
On the cut down GSR snorkel, do you think it would be feasible to connect the stub to the air inlet ducting on the Z4m, that way providing a sealed route to outside fresh air, and with an RPI ram air inlet should work well?
2008 Z4MR Silver Grey
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
- Martyn
- Member
- Posts: 203
- Joined: Mon Nov 25, 2013 9:41 pm
- Location: Poole, Dorset
- Contact:
EcuWorx remap for Z4M
It's been working fine with no issues.
Even with the snorkle trimmed to fit it's not aligned with the inlet hole so 'joining' them isn't possible unfortunately.
Even with the snorkle trimmed to fit it's not aligned with the inlet hole so 'joining' them isn't possible unfortunately.
-
- Member
- Posts: 194
- Joined: Mon May 28, 2012 11:08 pm
EcuWorx remap for Z4M
Thanks Martyn - I've sent you a DM
2008 Z4MR Silver Grey
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
-
- Member
- Posts: 141
- Joined: Fri Apr 24, 2020 4:46 pm
EcuWorx remap for Z4M
Any news on the tool to remap the Z4M?
- buzyg
- Legend
- Posts: 26544
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
-
- Member
- Posts: 194
- Joined: Mon May 28, 2012 11:08 pm
EcuWorx remap for Z4M
Martyn - would you consider printing another of the adapted snorkel, or share the 3d file so I could get one printed, as it looks a neat solution?
cheers
Justin
2008 Z4MR Silver Grey
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup
- Martyn
- Member
- Posts: 203
- Joined: Mon Nov 25, 2013 9:41 pm
- Location: Poole, Dorset
- Contact:
EcuWorx remap for Z4M
Yeah, sorry I've been pretty tied up with other bits but it's coming along nicely.
Last edited by Martyn on Thu Oct 06, 2022 11:58 am, edited 1 time in total.
-
- Newbie
- Posts: 26
- Joined: Tue Apr 12, 2022 9:49 pm
EcuWorx remap for Z4M
Love to see it!
Q: I can't see it on the screenshot, will it be possible to enable shift lights (like e46m3 smg)?
Q: I can't see it on the screenshot, will it be possible to enable shift lights (like e46m3 smg)?
- AndyBeech
- Senior Member
- Posts: 1629
- Joined: Mon Feb 18, 2013 2:25 pm
- Location: Reading / Bath
EcuWorx remap for Z4M
This looks bloody brilliant, very useful! Presume it's fairly similar to the E46 one you did so hopefully not too much more work for you to convert over to ours, it probably is though! Looking forward to when we can pay you to get our hands on it!
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!
- Martyn
- Member
- Posts: 203
- Joined: Mon Nov 25, 2013 9:41 pm
- Location: Poole, Dorset
- Contact:
EcuWorx remap for Z4M
Unfortunately not
-
- Member
- Posts: 141
- Joined: Fri Apr 24, 2020 4:46 pm
EcuWorx remap for Z4M
Martyn, do you have any idea on when this maybe available? would be interested in beta testing if possible
-
- Member
- Posts: 141
- Joined: Fri Apr 24, 2020 4:46 pm
- Martyn
- Member
- Posts: 203
- Joined: Mon Nov 25, 2013 9:41 pm
- Location: Poole, Dorset
- Contact:
EcuWorx remap for Z4M
Tough to give an exact date but maybe in the next week or so potentially.
Providing the ECU is not locked to prevent reading by a previous tuner (a few do this to protect their IP) you'll be able to tweak freely. Naturally this won't effect existing tuning (ignition, vanos, fueling etc).
Providing the ECU is not locked to prevent reading by a previous tuner (a few do this to protect their IP) you'll be able to tweak freely. Naturally this won't effect existing tuning (ignition, vanos, fueling etc).