You may actually be on to something. ISTA could not communicate with the alarm module on Terminal 15. I found the fuse 7.5amp was blown.mr.tourette wrote: βTue Jun 28, 2022 2:43 pm If the door cards have ever been off a wire may have been damaged, the wiring on the modules inside the door card look extremely delicate around 1mm thick and I can see how they would be easily damaged if you are not extremely careful with removal
Replaced it and the clown nose now flashes when locked and behaves normally. However the interior is not being monitored. If I lock the car with the roof down or window open nothing will trigger the alarm. However if I jack the car the tilt switch kicks in!
Door skins off is my next job to check the DWA modules.
I will update as I go.