Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

E85 Front suspension/shock absorbers- How To

User avatar
bigwinn
Lifer
Lifer
Posts: 4559
Joined: Wed Jul 08, 2020 7:13 pm
Location: Lincoln UK
Contact:

E85 Front suspension/shock absorbers- How To

Post by bigwinn » Sat Dec 18, 2021 5:11 pm

No worries gents

Wouter I’ve yet to do front suspension and find that the upper and lower rubbers are past it- but of course if you want peace of mind go for it!!!
If the forum helped you, why not help the forum back. Thats the Z4 way! :thumbsup:

Image


EWS Delete PM me
Coding- airbags etc PM me

WouterZZZZ
Member
Member
Posts: 81
Joined: Sat Jun 19, 2021 7:38 pm

E85 Front suspension/shock absorbers- How To

Post by WouterZZZZ » Sat Dec 18, 2021 10:38 pm

Thanks, I will replace them after nearly 17 years of perfect service. You have inspired me a lot. Have nice Christmas holidays. Off course I will let you know once I’ve replaced it all. Frgr Wouter

True-Blue
Lifer
Lifer
Posts: 3162
Joined: Sun Feb 10, 2019 2:10 pm
Location: Bristol/Bath

E85 Front suspension/shock absorbers- How To

Post by True-Blue » Sat Dec 18, 2021 10:41 pm

WouterZZZZ wrote: Sat Dec 18, 2021 10:38 pm Thanks, I will replace them after nearly 17 years of perfect service. You have inspired me a lot. Have nice Christmas holidays. Off course I will let you know once I’ve replaced it all. Frgr Wouter
I had no choice as my car was running on coilovers when I bought it, and the original struts were not included. I have to say though, the spring pads are cheap as chips really, so worth replacing IMHO :thumbsup:
Alpina Roadster S Lux no. 204 (1 of 15 uk cars in Alpina Blue)

Previous Z4’s :E89 30i, E89 20i, E85 3.0Si (X4) E85 3.0i, E86 3.0 Si, E85 2.5si, E85 2.5i

User avatar
Zulu4
Member
Member
Posts: 836
Joined: Tue Mar 16, 2021 1:22 pm
Location: Lincolnshire

E85 Front suspension/shock absorbers- How To

Post by Zulu4 » Tue Jul 12, 2022 6:40 pm

Thanks Stuart for the great write-up.

I just changed my front shocks for Bilstein B4's and I noticed a couple of things which others may find useful.

Firstly, the B4's have a longer shaft than the OEM shocks that were on my 3.0Si Sport. I had read that someone was concerned that this would be the case and that the B4's would now be in a permanently compressed state when fitted. I understand why now, so time will tell how they do.
20220712_123908.jpg
20220712_123908.jpg (282.95 KiB) Viewed 1031 times
Secondly, when I refitted the spring, I initially thought this was the correct place for the bottom end to go, as it seemed to fit nicely against the lip of the rubber.:
20220712_142527.jpg
20220712_142527.jpg (92.15 KiB) Viewed 1031 times
But looking at Bigwin's and my other side which I hadn't dismantled, it seems the end of the spring needs to be in this position:
20220712_144214.jpg
20220712_144214.jpg (155.51 KiB) Viewed 1031 times
2007 3.0si Auto Sport Roadster. Whippy.
Previous:
2003 3.0i SE Roadster. Whippy.

User avatar
bigwinn
Lifer
Lifer
Posts: 4559
Joined: Wed Jul 08, 2020 7:13 pm
Location: Lincoln UK
Contact:

E85 Front suspension/shock absorbers- How To

Post by bigwinn » Tue Jul 12, 2022 7:02 pm

That had me foxed for a while Rob as it looked like it should sit into that groove flush- but it doesn't!

Well done

And thanks again for the loan of VCDS
If the forum helped you, why not help the forum back. Thats the Z4 way! :thumbsup:

Image


EWS Delete PM me
Coding- airbags etc PM me

thespannerman
Member
Member
Posts: 110
Joined: Wed Jun 09, 2021 5:10 pm
Location: Oldbury, West Midlands

E85 Front suspension/shock absorbers- How To

Post by thespannerman » Sun Jul 24, 2022 3:53 pm

Just ordered and now awaiting delivery of all the bits to do mine, but intriguing bit about the lower spring position as I would have also thought it would have gone up against that step in the rubber.

Al
BMW newbie, 2003 E85 2.5 SE - but after 10 Discoveries this ought to be a walk in the park :P

User avatar
enuff_zed
Lifer
Lifer
Posts: 14383
Joined: Wed Oct 26, 2016 11:05 am
Location: Attleborough, Norfolk

E85 Front suspension/shock absorbers- How To

Post by enuff_zed » Sun Jul 24, 2022 3:55 pm

thespannerman wrote: Sun Jul 24, 2022 3:53 pm Just ordered and now awaiting delivery of all the bits to do mine, but intriguing bit about the lower spring position as I would have also thought it would have gone up against that step in the rubber.
Nope, mine have always been the same, don't quite line up as you'd think.
HQ of 'Norfolk Zed Rescue'.
Always happy to help if I can.

If the forum helped you, why not help the forum back. Thats the Z4 way! :thumbsup:
Image

Zedebee
Lifer
Lifer
Posts: 3296
Joined: Tue Sep 29, 2020 10:37 pm
Location: North Hampshire

E85 Front suspension/shock absorbers- How To

Post by Zedebee » Sun Sep 17, 2023 11:01 pm

Hi Bigwinn, how did you torque up the top nut to 64Nm without the piston spinning? NewTIS says to use a special tool. I can’t for the life of me remember how I did it last time.
2003 Maldives Blue 3.0i auto
Previously: Maldives Blue 2.5i manual (its back!) and another, and a Monaco Blue 3.0Si coupe

User avatar
bigwinn
Lifer
Lifer
Posts: 4559
Joined: Wed Jul 08, 2020 7:13 pm
Location: Lincoln UK
Contact:

E85 Front suspension/shock absorbers- How To

Post by bigwinn » Mon Sep 18, 2023 6:41 am

If I recall I did it as tight as I could off the car with mole grips on the shaft then installed on the car and re torqued with the weight on the wheels
If the forum helped you, why not help the forum back. Thats the Z4 way! :thumbsup:

Image


EWS Delete PM me
Coding- airbags etc PM me

rob_heff
Newbie
Newbie
Posts: 19
Joined: Wed Feb 09, 2022 1:42 pm

E85 Front suspension/shock absorbers- How To

Post by rob_heff » Mon Mar 18, 2024 11:46 am

Zulu4, Just wondered how you were getting on with the B4's? I've emailed Blistein and they told me they aren't correct for the 3.0i but lots of people do use them, I'm thinking about getting some for mine, but curious how they're behaving? Cheers

User avatar
Z4Mariner
Member
Member
Posts: 169
Joined: Tue Jan 11, 2022 6:40 pm

E85 Front suspension/shock absorbers- How To

Post by Z4Mariner » Tue Mar 19, 2024 12:29 pm

I have about 9K miles on my 3.0Si coupe (sport springs) with B4's. I went with advice from a friend's son who's a BMW master tech - he said I'd likely find B6's too harsh on our rough roads. The B4's are doing fine, and it's been a good choice for me. They didn't increase my ride height.
Z4Mariner
Minnesota, USA

2006 Z4 Coupe 3.0Si, Montego Blue, MT

rob_heff
Newbie
Newbie
Posts: 19
Joined: Wed Feb 09, 2022 1:42 pm

E85 Front suspension/shock absorbers- How To

Post by rob_heff » Wed Mar 20, 2024 2:18 pm

Z4Mariner wrote: Tue Mar 19, 2024 12:29 pm The B4's are doing fine, and it's been a good choice for me. They didn't increase my ride height.
Really appreciate the reply - I've purchased some B4's last night and am excited to get these on with the existing sport springs. Great to hear form somebody that can vouch for them, and that's exactly my reason for not wanting anything sportier too.

User avatar
chanlon1
Member
Member
Posts: 388
Joined: Mon Jan 02, 2023 11:36 pm
Location: Belfast

E85 Front suspension/shock absorbers- How To

Post by chanlon1 » Wed Mar 20, 2024 2:30 pm

I put on B4's along with Eibach Pro lowered springs about 6 weeks ago. Probably only done 100 miles so far on them.
My impressions:
I haven't noticed any difference in ride quality, however, I feel that my old shocks were past their prime, so maybe I am used to a harsher ride?
One side of the car is around 5 mm lower than the other. We've had the car up on a ramp, taken measurements, checked everything out and cannot notice anything different between sides. It's not overly noticeable, but when you know, you know.......
E86 Z4 Coupe 2006 Silver

User avatar
Zulu4
Member
Member
Posts: 836
Joined: Tue Mar 16, 2021 1:22 pm
Location: Lincolnshire

E85 Front suspension/shock absorbers- How To

Post by Zulu4 » Fri Mar 22, 2024 10:38 am

rob_heff wrote: Mon Mar 18, 2024 11:46 am Zulu4, Just wondered how you were getting on with the B4's? I've emailed Blistein and they told me they aren't correct for the 3.0i but lots of people do use them, I'm thinking about getting some for mine, but curious how they're behaving? Cheers
Hi, they have been fine.
As others have said, I haven't noticed that much difference in ride quality. The E85 is always going to be a but bumpy though.
2007 3.0si Auto Sport Roadster. Whippy.
Previous:
2003 3.0i SE Roadster. Whippy.

Post Reply