Wax off Daniel san

[Grumpy owld git]

Quite a few topics covering which waxes etc to put on, but what are people using to remove old waxes etc.

Was going to try a lot of car shampoo with a good dose of washing up liquid?

My 108s got a refurb last week then I've
got my clay, da polisher, megs compound, poor boys black hole and autoglym hd wax to go at.

She's going to be looking good.

[camtwister]

Personally, I'd avoid the washing up liquid because of the salt content.
To remove products, I would use a surface cleanser. For example, Poorboy's Strip Down or Chemical Guys Clean Slate.
If you need to go further, use a clay bar and lubricant.

[BeeEmm]

what are people using to remove old waxes etc.

Only one product for me. When I waxed my cars I always used this to remove old wax, tree sap etc. A great smelly product that can be applied by cloth and rinsed off.
https://bilthamber.com/product/surfex-hd/

[cowboyjon]

Another bilt hamber vote here.

Good company, great products.

[Beemingallover]

Any other waxes recommended as well as Bilt?

[Nanu]

Just going slightly off topic but I always used to use Maguires wax, 2 coats all over and a third coat on upper surfaces. Whole process took about 2 days which included a machine polish. That was until I spoke to Byron, one of our expert colleagues on the subject and he put me onto Gtechniq C2 ceramic sealant.

Today I washed the girl and rinsed her off. Then 8 minutes later the results can been seen. Spray the product onto the wet surface and wipe off with a drying towel and hey presto! The photos don’t actually do it justice.

It’s supposed to last for b/w 4 to 8 months depending on who you believe.

Will never go back to wax which although gives excellent results, is far too hard work.