Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Exhaust bypass

"M" Specific discussion
Justino
Member
Member
Posts: 191
Joined: Mon May 28, 2012 11:08 pm

Exhaust bypass

Post by Justino » Thu Apr 07, 2022 3:33 pm

D4dawg wrote: Tue Jan 31, 2017 10:00 pm Pokes nose in;)

1 metal ring per bank
However I'd replace nuts and bolts as can stick and throw a bunny and sheer one
Ref pipes being straight
Hang in hangers firstly
Connect up flanges and bolts remembering ring hand tight
Do up hangers fully
Correct the pipes at the flanges connection:)
Screwfix sell the right size in stainless also, I replaced mine recently along with the repair clamps as the original cast ones had cracked, and looked dreadful, like a rusting WW1 ship!
2008 Z4MR Silver Grey
2017 Audi A6 Avant Quattro 3.0 BiTdi
2003 Clio 172 Cup

NLW73
Member
Member
Posts: 121
Joined: Sun Jan 23, 2022 8:10 pm

Exhaust bypass

Post by NLW73 » Mon Apr 11, 2022 9:27 pm

i got an email from steve at warren and they can make some sets up:

We do make them from time to time, we don’t carry any stock but the last time we made them we made 4 sets @ £28.00 per set plus vat and carriage. Smaller quantity will be a higher unit cost.

Please note they are ¾” o.d not bore that we supply.


let me know if anyone is up for a set

User avatar
Joneeboy
Member
Member
Posts: 307
Joined: Sun Oct 15, 2017 5:49 pm
Location: West Kent

Exhaust bypass

Post by Joneeboy » Tue May 03, 2022 10:27 pm

NLW73 wrote: Mon Apr 11, 2022 9:27 pm i got an email from steve at warren and they can make some sets up:

We do make them from time to time, we don’t carry any stock but the last time we made them we made 4 sets @ £28.00 per set plus vat and carriage. Smaller quantity will be a higher unit cost.

Please note they are ¾” o.d not bore that we supply.


let me know if anyone is up for a set
I'm up for a set.

Post Reply