Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Where to source strut brace

"M" Specific discussion
Rossm09
Member
Member
Posts: 125
Joined: Sat Aug 25, 2012 9:18 pm

Where to source strut brace

Post by Rossm09 » Tue Sep 14, 2021 11:34 pm

Iv had a bit of a dig online and struggling to find where to buy a strut brace?
Cheers

User avatar
Optinium
Member
Member
Posts: 90
Joined: Mon Jun 12, 2017 12:21 am
Location: Warrington
Contact:

Where to source strut brace

Post by Optinium » Tue Sep 14, 2021 11:45 pm

Gonna follow this, I've seen a few but when digging deeper every one has mixed results. 2 I've seen/wanted are no longer made as well, was thinking maybe the one from the E46 M3 but they're pretty pricey for a heavily used part and still need some modification. Hopefully there is nice off the shelf one suggested.

Youtube: Car Beard Instagram: its_car_beard
Current: 2015 F-Type R RWD, 2022 Tucson N-Line S

Gone: 2021 GR Supra Pro 2007 E86 Z4MC 2016 F-TYPE R AWD Convertible, 2014 F-TYPE V6S, 2007 E86 Z4MC, 2010 E89 Z4 23iSdrive

User avatar
RedUn
Senior Member
Senior Member
Posts: 1102
Joined: Sat Jun 16, 2012 7:33 pm
Location: Hertfordshire

Where to source strut brace

Post by RedUn » Wed Sep 15, 2021 12:15 am

There is a z4 specific oem one, rocking horse these days though..
IMOLA Z4///MR

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1623
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

Where to source strut brace

Post by AndyBeech » Wed Sep 15, 2021 12:20 am

The E46 M3 does fit, only needs modding if you run the camber pin still, which if you want any kind of meaningful camber you won’t.
Not a perfect a fit as the Z4 specific one but much more availability. If it helps I picked one up off eBay 6 months ago for £145 in v good condition. Fit and forget, hasn’t given me any issues so far….
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

JamesClements
Member
Member
Posts: 165
Joined: Tue Jun 23, 2020 8:46 pm
Location: Leicestershire

Where to source strut brace

Post by JamesClements » Wed Sep 15, 2021 9:26 am

I ordered this one last year direct from Wiechers in Germany

https://www.wiechers-sport.de/en/shop/d ... ben-detail

I think it was about £100.00 delivered at the time. They also do one for the M, bolt straight in no need to modify anything. Can send a pic if you like :)
2006 Sapphire Black E86 3.0si | 108's, ZHP, Stubby, Eibach Springs
2007 Carbon Black E85 2.5i | 19" NAD alloys, Pilot Sport 4S, strut brace, Stubby, ZHP, Brembo 4 pots, Greenstuff pads, Alcantara retrim, roof motor in boot
2022 BMW G80 320D Touring

User avatar
RvsBmw
Member
Member
Posts: 110
Joined: Sat Apr 17, 2021 11:59 am

Where to source strut brace

Post by RvsBmw » Wed Sep 15, 2021 9:37 am

Rossm09 wrote: Tue Sep 14, 2021 11:34 pm Iv had a bit of a dig online and struggling to find where to buy a strut brace?
Hi Ross,

there different option:
- OEM z4 isnt in production anymore i think';
- OEM M3, will fit (i did also) but less space between engine (fuel rail) and the bar. Personal i wont buy it again, its to close and can damage the rail or motor mounts.
- Just go with the Skyer Motorsport ones, good 3-way strutbrace which is comming out soon :). Check there instagram and sent Jordan a message.
BMW Z4M Coupe '08 | Sapphire Black | Bicolour Silverstone Anthrazit | OEM CSL's | Aero's

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1623
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

Where to source strut brace

Post by AndyBeech » Wed Sep 15, 2021 12:27 pm

RvsBmw wrote: Wed Sep 15, 2021 9:37 am
Rossm09 wrote: Tue Sep 14, 2021 11:34 pm Iv had a bit of a dig online and struggling to find where to buy a strut brace?
- OEM M3, will fit (i did also) but less space between engine (fuel rail) and the bar. Personal i wont buy it again, its to close and can damage the rail or motor mounts.
It is close but not that close, there's no contact, did you fit it properly? I've done numerous track days and general driving with it. Not sure how it can damage (I presume you mean) engine mounts?! Have you got any evidence of the above as I would be interested.

Skyer.....sure it'll be a bargain, they still flogging side covers for £300? :lol:
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

User avatar
tomscott
Lifer
Lifer
Posts: 7466
Joined: Mon Sep 19, 2011 12:26 pm
Location: Manchester
Contact:

Where to source strut brace

Post by tomscott » Wed Sep 15, 2021 1:09 pm

I bought one for sale on here but they aren't cheap now and a few have come up for £300-350 not many were made. The M3 version will fit if the camber pin is removed. These are a bit cheaper.

User avatar
XMetal
Member
Member
Posts: 219
Joined: Sat Jul 14, 2012 6:57 am
Location: Sunny California

Where to source strut brace

Post by XMetal » Wed Sep 15, 2021 2:38 pm

AndyBeech wrote: Wed Sep 15, 2021 12:27 pm It is close but not that close, there's no contact, did you fit it properly? I've done numerous track days and general driving with it. Not sure how it can damage (I presume you mean) engine mounts?! Have you got any evidence of the above as I would be interested.

Skyer.....sure it'll be a bargain, they still flogging side covers for £300? :lol:
The engine height is very much dependent on the condition of your motor mounts. The engine usually sit a bit lower as the motor mounts age, assuming that you're not running solid motor mounts. So...Your Mileage May Vary. It's not a blanket statement that just because the bar cleared your car without issues that it will do the same on another car with newer/different engine mounts
Last edited by XMetal on Wed Sep 15, 2021 2:44 pm, edited 1 time in total.

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1623
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

Where to source strut brace

Post by AndyBeech » Wed Sep 15, 2021 2:43 pm

XMetal wrote: Wed Sep 15, 2021 2:38 pm
AndyBeech wrote: Wed Sep 15, 2021 12:27 pm It is close but not that close, there's no contact, did you fit it properly? I've done numerous track days and general driving with it. Not sure how it can damage (I presume you mean) engine mounts?! Have you got any evidence of the above as I would be interested.

Skyer.....sure it'll be a bargain, they still flogging side covers for £300? :lol:
The engine height is very much dependent on the condition of your motor mounts. The engine usually sit a bit lower as the motor mounts age, assuming that you're not running solid motor mounts. So...Your Mileage May Vary...
Mine are virtually brand new and I’ve no contact…..so I really don’t think that’s an issue.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1623
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

Where to source strut brace

Post by AndyBeech » Wed Sep 15, 2021 3:07 pm

XMetal wrote: Wed Sep 15, 2021 2:38 pm
AndyBeech wrote: Wed Sep 15, 2021 12:27 pm It is close but not that close, there's no contact, did you fit it properly? I've done numerous track days and general driving with it. Not sure how it can damage (I presume you mean) engine mounts?! Have you got any evidence of the above as I would be interested.

Skyer.....sure it'll be a bargain, they still flogging side covers for £300? :lol:
It's not a blanket statement that just because the bar cleared your car without issues that it will do the same on another car with newer/different engine mounts
Maybe not but again are we talking anything evidential or just musings? My point is that non-evidential / hypothetical information isn't very useful, anyone can assume that something might or might not be the case but without anything to back it up it's not that useful as 'information'.

I'm not particularly defending the M3 strut, I'd happily take it off if there's reason to, I'm not affiliated with it in any way! :lol: I could happily sell it for what I brought it for so I've no reason to defend it, just passing on my actual experience with it so far which is the camber bolt needs removing and it slightly touches on the bonnet above one of the strut mountings.

I would agree though if Rvs said his was touching or close to it then I guess mileage can vary, seems odd though, should all fit the same. Maybe it was damaged, not fitted correctly, who knows, I'm not convinced it's engine mount related though. I think it's fair to say it's an imperfect solution but not unusable either.

Just as a reference point this is mine as fitted re: clearance
D326B805-6162-4F0F-B707-43DC98FE015D.jpeg
D326B805-6162-4F0F-B707-43DC98FE015D.jpeg (108.91 KiB) Viewed 696 times
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

Jon2215
Member
Member
Posts: 154
Joined: Tue May 19, 2020 6:18 pm

Where to source strut brace

Post by Jon2215 » Wed Sep 15, 2021 4:27 pm

Reference Andys picture with the clearance,mines the same with the M3 brace,just about get my finger between the rail and brace.
2007 M Coupe
Interlagos Blue,Sepang leather,carbon leather trim

User avatar
Optinium
Member
Member
Posts: 90
Joined: Mon Jun 12, 2017 12:21 am
Location: Warrington
Contact:

Where to source strut brace

Post by Optinium » Wed Sep 15, 2021 5:48 pm

If purchasing from Ebay or second hand in general the Strut Brace could have came off a car that was in an accident and warped it slightly so if possible it's worth asking. How much did you peeps pay for the M3 brace?

Youtube: Car Beard Instagram: its_car_beard
Current: 2015 F-Type R RWD, 2022 Tucson N-Line S

Gone: 2021 GR Supra Pro 2007 E86 Z4MC 2016 F-TYPE R AWD Convertible, 2014 F-TYPE V6S, 2007 E86 Z4MC, 2010 E89 Z4 23iSdrive

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Where to source strut brace

Post by srhutch » Wed Sep 15, 2021 9:31 pm

As mentioned above M3 brace fits fine, just remove the camber pins or cut down like I did.
D73BC090-2734-44D8-8F5A-E65080E97E5A.jpeg
D73BC090-2734-44D8-8F5A-E65080E97E5A.jpeg (59.93 KiB) Viewed 630 times
CAEF43EA-FAD8-414F-97F8-544E192C9995.jpeg
CAEF43EA-FAD8-414F-97F8-544E192C9995.jpeg (64.45 KiB) Viewed 630 times
Image

Jon2215
Member
Member
Posts: 154
Joined: Tue May 19, 2020 6:18 pm

Where to source strut brace

Post by Jon2215 » Wed Sep 15, 2021 9:52 pm

Optinium wrote: Wed Sep 15, 2021 5:48 pm If purchasing from Ebay or second hand in general the Strut Brace could have came off a car that was in an accident and warped it slightly so if possible it's worth asking. How much did you peeps pay for the M3 brace?
eBay last year £165 with all the mounting nuts and caps.
2007 M Coupe
Interlagos Blue,Sepang leather,carbon leather trim

Post Reply