Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Headlight refurb. Overdoing it?
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
My headlights were in dire need of a refurb and after seeing what miracles a DA could do to the flat paint on my bootlid I was inspired to have a crack at them at last.
After magically being able to not knacker my bumper retainer brackets I unmounted the bumper, then lights and had a good nosey around for any previous damage. Thankfully, nothing spurious found apart from the remnants and overspray from it's front-end respray it had before I bought it.
So, 3M headlight kit ready to go and started out by giving them a good clean. They were in a truly shocking state!
After 2 passes with the 500 and 800 grit discs I did my own additional stages with 1000, then 2000grit paper,
then a final stage with the 3M 3000grit disc. Not looking too shabby at all at this point! A welcome sight.
The 3M kit is well-regarded and contains more components than you actually need and the fact that it comes with a drill attachment for 70mm pads, plus an orange buffing pad means it can be used again and again if required.
While the headlights were off I thought I would take the opportunity to remove the lenses for a bit of spit and polish. What a chew getting these things out, but ultimately worth it!
Before, after.
Read and watched some very favourable reviews of Spraymax 2K clearcoat with its' own separate hardener component, so decided to order a ikkle can at Eu25.00 .
This is the absolute best way to protect your newly-refurbed headlights imo, especially if you decide to unmount them as I did.
After a final polish with the orange buffer disc and Sonax headlight polish I applied 3 coats of the 2K clearcoat. There's a leeetle bit of orange peel but nothing too drastic. I'm loathed to let rip with the 1000/2000 grit on them as I'm not 100% sure how this particular clearcoat will react.
What would you do? Leave as-is or buff and polish again?
After magically being able to not knacker my bumper retainer brackets I unmounted the bumper, then lights and had a good nosey around for any previous damage. Thankfully, nothing spurious found apart from the remnants and overspray from it's front-end respray it had before I bought it.
So, 3M headlight kit ready to go and started out by giving them a good clean. They were in a truly shocking state!
After 2 passes with the 500 and 800 grit discs I did my own additional stages with 1000, then 2000grit paper,
then a final stage with the 3M 3000grit disc. Not looking too shabby at all at this point! A welcome sight.
The 3M kit is well-regarded and contains more components than you actually need and the fact that it comes with a drill attachment for 70mm pads, plus an orange buffing pad means it can be used again and again if required.
While the headlights were off I thought I would take the opportunity to remove the lenses for a bit of spit and polish. What a chew getting these things out, but ultimately worth it!
Before, after.
Read and watched some very favourable reviews of Spraymax 2K clearcoat with its' own separate hardener component, so decided to order a ikkle can at Eu25.00 .
This is the absolute best way to protect your newly-refurbed headlights imo, especially if you decide to unmount them as I did.
After a final polish with the orange buffer disc and Sonax headlight polish I applied 3 coats of the 2K clearcoat. There's a leeetle bit of orange peel but nothing too drastic. I'm loathed to let rip with the 1000/2000 grit on them as I'm not 100% sure how this particular clearcoat will react.
What would you do? Leave as-is or buff and polish again?
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
-
- Newbie
- Posts: 5
- Joined: Sat Sep 12, 2020 6:31 am
Headlight refurb. Overdoing it?
Look fantastic chap
- Big Andra
- Member
- Posts: 867
- Joined: Tue Jul 17, 2018 1:45 pm
- Location: Scotland
Headlight refurb. Overdoing it?
I'd say you've done a cracking job. As for leaving them as-is, that's entirely up to you.
2009 E89 2.5 Alpine white.
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Headlight refurb. Overdoing it?
Look good. Leave alone.
-
- Member
- Posts: 703
- Joined: Sun Sep 02, 2018 12:47 am
- Location: Shropshire
Headlight refurb. Overdoing it?
Excellent job, quit whilst you're winning
Ex E86 Z4 3.0si coupé facelift blue now Z'less
Porsche 997 C2S black-gone-, Mazda Eunos 1.8 yellow-gone-, Audi S4 Avant v6 Quattro 3.0 supercharged red-gone. Abarth 500 red. Abarth 124 Spider GT black. Porsche Cayenne red.
Porsche 997 C2S black-gone-, Mazda Eunos 1.8 yellow-gone-, Audi S4 Avant v6 Quattro 3.0 supercharged red-gone. Abarth 500 red. Abarth 124 Spider GT black. Porsche Cayenne red.
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
Good advice to leave alone, after leaving overnight the orangepeel has almost all but disappeared now.
Laquer must have contracted a bit while curing/drying.
Time to re-mount.
Laquer must have contracted a bit while curing/drying.
Time to re-mount.
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
-
- Member
- Posts: 838
- Joined: Sun Aug 05, 2012 9:57 pm
- Location: Bournemouth/Turin
-
- Member
- Posts: 72
- Joined: Mon Jul 20, 2020 11:24 pm
Headlight refurb. Overdoing it?
Looks great, good job
2007 2.0i S E85 Monaco Blue Beige roof and interior
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
Wish I could say the same about me after the mallarchy of getting the bumper back on those fekin brackets. What a pallava! It's put a year on me at least
Worth it in the end I suppose.
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
-
- Member
- Posts: 117
- Joined: Fri Sep 18, 2020 5:19 pm
- Location: Bham
Headlight refurb. Overdoing it?
Amazing work
I have turtlewax headlight restoration waiting, will do the same one day...
I have turtlewax headlight restoration waiting, will do the same one day...
04' 3.0i
-
- Lifer
- Posts: 9538
- Joined: Sat Jun 13, 2015 9:09 am
- Location: South west Buckinghamshire
Headlight refurb. Overdoing it?
Looks good Chris, has it made much difference to night driving
BMW Z4 30i 2003 auto 107's Whippy Toledo Blue
Beige M sport seats, wood dash
Toyota MR2 NA 1995
Triumph GT6 1972 (project)
Land Rover Discovery 1994 TDI (Tow car)
Mini 1000 1981
Beige M sport seats, wood dash
Toyota MR2 NA 1995
Triumph GT6 1972 (project)
Land Rover Discovery 1994 TDI (Tow car)
Mini 1000 1981
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
ta fella. don't forget to seal/protect with laquer. none of that sealant wax/spray sh!te that just washes off.
it's like night and day fred. like day, at night. like daylight, at night. lol
thx fella
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
Youtuber Ratchets and Wrenches just released a 3 year update video on his 4 methods of headlamp refurb.
I was convinced to utilise his tip on using a 2K clear coat as a final stage sealer and thnakfully it looks like I should have at least 3 years of decent night-driving.
The Spraymax 2K clearcoat with it's hardener component has defintely contributed to the longevity of this refurb method. It's a bit pricey but ultimately, worth it.
Have a butchers'
I was convinced to utilise his tip on using a 2K clear coat as a final stage sealer and thnakfully it looks like I should have at least 3 years of decent night-driving.
The Spraymax 2K clearcoat with it's hardener component has defintely contributed to the longevity of this refurb method. It's a bit pricey but ultimately, worth it.
Have a butchers'
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
- Motionblurrr
- Member
- Posts: 140
- Joined: Sun Oct 04, 2009 6:24 pm
Headlight refurb. Overdoing it?
Just an FYI about headlight restoring (I’m a huge lighting nerd so bare with me): Adding a clear coat is a bit detrimental to the headlight performance because the difference in opacity, the surface and weird patterns (waviness, orange peel from the clear coat) reduces the intensity and affects the beam pattern under the cutoff. The cutoff also becomes less razor sharp. It’s another layer the light has to go through and when it comes to physics; there’s no free lunch.
Obviously, it’s much better than a very hazed, damaged headlight but I’d just like to point that out.
The reason those headlight restoration kits they sell in retail stores use those very “light” coatings (in the form of spray or a wipe) that only last about a year, isn’t because they want to get your money—the beam becomes affected by a thicker, application of a clear coat—especially from a rattle can because clear coats aren’t as optically clear as the headlight lenses themselves—nor the year lasting “UV sealant” from retail kits.
I’ve done experiment where one side had a perfectly applied clear coat and the other side was restored by a Meguiar’s kit with the finishing “UV sealant” at the end, evenly applied. The Meguiar’s side headlight beam was a bit brighter and more sharply defined, while the clear coat side was a bit more dim and the beam pattern wasn’t as “sharp”.
Even if it looks to the human eye that it’s perfectly clear—it’s not and it won’t perform as well as a fresh new factory headlight, nor a restored headlight with a UV sealant from a retail kit.
I get it though—it looks a hell of a lot better than having faded headlights.
Obviously, it’s much better than a very hazed, damaged headlight but I’d just like to point that out.
The reason those headlight restoration kits they sell in retail stores use those very “light” coatings (in the form of spray or a wipe) that only last about a year, isn’t because they want to get your money—the beam becomes affected by a thicker, application of a clear coat—especially from a rattle can because clear coats aren’t as optically clear as the headlight lenses themselves—nor the year lasting “UV sealant” from retail kits.
I’ve done experiment where one side had a perfectly applied clear coat and the other side was restored by a Meguiar’s kit with the finishing “UV sealant” at the end, evenly applied. The Meguiar’s side headlight beam was a bit brighter and more sharply defined, while the clear coat side was a bit more dim and the beam pattern wasn’t as “sharp”.
Even if it looks to the human eye that it’s perfectly clear—it’s not and it won’t perform as well as a fresh new factory headlight, nor a restored headlight with a UV sealant from a retail kit.
I get it though—it looks a hell of a lot better than having faded headlights.
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Headlight refurb. Overdoing it?
I get what you say about laquering and was a bit concerned about refraction from the very slight orangepeel dissipating the beams but after electing to not sand down flat and then testing once the headlights were re-mounted I’m more than happy with the performance. Long throw, bright, sharp beam pattern, no weird dissipation.
Maybe this would be different between halogens and HID’s but I can certainly attest that my 5800k HID’s now work as they should.
The main benefit to spraying a few coats of laquer is longevity. As can be seen in the video the laquered headlights still look minty fresh 3 years on. Probably good for another 3 years too without needing a refurb perhaps. And when they do need a refurb you will be sanding and polishing back the laquer before you get to the plastic.
Maybe this would be different between halogens and HID’s but I can certainly attest that my 5800k HID’s now work as they should.
The main benefit to spraying a few coats of laquer is longevity. As can be seen in the video the laquered headlights still look minty fresh 3 years on. Probably good for another 3 years too without needing a refurb perhaps. And when they do need a refurb you will be sanding and polishing back the laquer before you get to the plastic.
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.