Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Aftermarket 3rd brake light poor fit.

Discuss problems you have had or are having with your Z4
User avatar
steve_naive
Member
Member
Posts: 219
Joined: Tue Oct 01, 2019 2:30 pm
Location: Northern Ireland

Aftermarket 3rd brake light poor fit.

Post by steve_naive » Sat Nov 23, 2019 4:33 pm

I'd heard aftermarket lights were on par with the expensive OEM versions, so nabbed one off ebay:

Image

Am I doing it wrong? Had to really tighten the nuts down to get the rubber seal to snug in, and even then it was questionable.
I'd bought the newer, softer springs from BMW to avoid the whole issue of pressure cracking. So this is a big no-no!

Anybody know of an aftermarket version that actually fits?

Edit: should point out that it's the rubber seal that's the issue. Too squared off for purpose. The seal on the one I already had in is bevelled, maybe I could reuse it?

noiseboy72
Member
Member
Posts: 173
Joined: Wed Apr 25, 2018 7:47 pm

Aftermarket 3rd brake light poor fit.

Post by noiseboy72 » Sun Nov 24, 2019 9:43 pm

I found that heating the assembly over a blow torch allowed me to bend it to the correct shape. I didn't notice the seal being the issue, more the overly shallow radius.
E85 2.5si Sport in dark blue. Calibre CC S wheels

What could possibly go wrong!

User avatar
steve_naive
Member
Member
Posts: 219
Joined: Tue Oct 01, 2019 2:30 pm
Location: Northern Ireland

Aftermarket 3rd brake light poor fit.

Post by steve_naive » Sun Nov 24, 2019 9:55 pm

noiseboy72 wrote: Sun Nov 24, 2019 9:43 pm I found that heating the assembly over a blow torch allowed me to bend it to the correct shape. I didn't notice the seal being the issue, more the overly shallow radius.
Ooh. Is that with an aftermarket piece?

I don't own a blow torch, maybe a hot hairdryer! How do you assure an consistent radius when heating?

noiseboy72
Member
Member
Posts: 173
Joined: Wed Apr 25, 2018 7:47 pm

Aftermarket 3rd brake light poor fit.

Post by noiseboy72 » Fri Nov 29, 2019 10:53 pm

After market clear type.

I'm sure a hair dryer or hot air gun would work just as well. I just kept test fitting it until it was slightly over bent and then fitted the nuts.

Looking at it 12 months later, it's relaxed back a little, but is only a mm or 2 proud.
E85 2.5si Sport in dark blue. Calibre CC S wheels

What could possibly go wrong!

User avatar
steve_naive
Member
Member
Posts: 219
Joined: Tue Oct 01, 2019 2:30 pm
Location: Northern Ireland

Aftermarket 3rd brake light poor fit.

Post by steve_naive » Mon Dec 02, 2019 8:28 pm

Sending mine back. Bought a genuine one for 50 quid.

User avatar
oldgitdave
Senior Member
Senior Member
Posts: 1505
Joined: Sun Jul 30, 2017 8:47 pm
Location: Derbyshire

Aftermarket 3rd brake light poor fit.

Post by oldgitdave » Mon Dec 02, 2019 11:15 pm

Yeah, I had a nightmare with a non oem one, not the only one either:
viewtopic.php?f=2&t=116958&p=1678206#p1678206
Zedless :(

User avatar
steve_naive
Member
Member
Posts: 219
Joined: Tue Oct 01, 2019 2:30 pm
Location: Northern Ireland

Aftermarket 3rd brake light poor fit.

Post by steve_naive » Tue Dec 03, 2019 12:29 pm

oldgitdave wrote: Mon Dec 02, 2019 11:15 pm Yeah, I had a nightmare with a non oem one, not the only one either:
viewtopic.php?f=2&t=116958&p=1678206#p1678206
How did I miss that one??

My connecter actually worked but the fit was rubbish. Literally only changed it to be watertight.

Also got my genuine one from prentice portadown BMW. Thought I'd be paying 80 quid. :thumbsup:

User avatar
oldgitdave
Senior Member
Senior Member
Posts: 1505
Joined: Sun Jul 30, 2017 8:47 pm
Location: Derbyshire

Aftermarket 3rd brake light poor fit.

Post by oldgitdave » Tue Dec 03, 2019 12:47 pm

steve_naive wrote: Tue Dec 03, 2019 12:29 pm
oldgitdave wrote: Mon Dec 02, 2019 11:15 pm Yeah, I had a nightmare with a non oem one, not the only one either:
viewtopic.php?f=2&t=116958&p=1678206#p1678206
How did I miss that one??

My connecter actually worked but the fit was rubbish. Literally only changed it to be watertight.

Also got my genuine one from prentice portadown BMW. Thought I'd be paying 80 quid. :thumbsup:
Me too. I was pleasantly surprised at the price from them :thumbsup: . I also found that that, as well as the fit, the seal is much better quality than the non OEM. Let's hope they last eh? :D .
Zedless :(

User avatar
steve_naive
Member
Member
Posts: 219
Joined: Tue Oct 01, 2019 2:30 pm
Location: Northern Ireland

Aftermarket 3rd brake light poor fit.

Post by steve_naive » Tue Dec 03, 2019 4:29 pm

oldgitdave wrote: Tue Dec 03, 2019 12:47 pm
steve_naive wrote: Tue Dec 03, 2019 12:29 pm
oldgitdave wrote: Mon Dec 02, 2019 11:15 pm Yeah, I had a nightmare with a non oem one, not the only one either:
viewtopic.php?f=2&t=116958&p=1678206#p1678206
How did I miss that one??

My connecter actually worked but the fit was rubbish. Literally only changed it to be watertight.

Also got my genuine one from prentice portadown BMW. Thought I'd be paying 80 quid. :thumbsup:
Me too. I was pleasantly surprised at the price from them :thumbsup: . I also found that that, as well as the fit, the seal is much better quality than the non OEM. Let's hope they last eh? :D .
I bought those softer springs and plan on being very gentle when closing the boot. :D

User avatar
oldgitdave
Senior Member
Senior Member
Posts: 1505
Joined: Sun Jul 30, 2017 8:47 pm
Location: Derbyshire

Aftermarket 3rd brake light poor fit.

Post by oldgitdave » Tue Dec 03, 2019 4:37 pm

steve_naive wrote: Tue Dec 03, 2019 4:29 pm
oldgitdave wrote: Tue Dec 03, 2019 12:47 pm
steve_naive wrote: Tue Dec 03, 2019 12:29 pm

How did I miss that one??

My connecter actually worked but the fit was rubbish. Literally only changed it to be watertight.

Also got my genuine one from prentice portadown BMW. Thought I'd be paying 80 quid. :thumbsup:
Me too. I was pleasantly surprised at the price from them :thumbsup: . I also found that that, as well as the fit, the seal is much better quality than the non OEM. Let's hope they last eh? :D .
I bought those softer springs and plan on being very gentle when closing the boot. :D
Me too :thumbsup: . After reading on here I bought new springs & nuts. Just got to train wifey not to slam the boot :roll: .
Zedless :(

User avatar
AndyBeech
Senior Member
Senior Member
Posts: 1623
Joined: Mon Feb 18, 2013 2:25 pm
Location: Reading / Bath

Aftermarket 3rd brake light poor fit.

Post by AndyBeech » Tue Dec 03, 2019 4:55 pm

With the OEM one it might not initially be flush but after fitting it'll settle into position. This is what I found with mine anyway. Also thought it was a problem but mine now sits flush like it should.
Z4MR - Gruppe M, Bilstein PSS10, CSL's + 18" CSL reps with semi's, RTAB Limiters, Powerflex’d, PF Camber Arms, K-Sport BBK / RSL-29, GC Camber Plates, Strut Brace, Exhaust valves, custom brake cooling, complete underside refresh!

Mr roadster
Member
Member
Posts: 203
Joined: Sun Sep 23, 2018 8:38 pm

Aftermarket 3rd brake light poor fit.

Post by Mr roadster » Tue Dec 03, 2019 5:17 pm

Hi guys my third brake light disintegrated. Went to bmw dealership Stockton on tees Cleveland £97.00 so what did you guys pay.
I’ve ordered a spurious one hope it fits because I certainly don’t want to pay £97.00 incl vat :headbang:

User avatar
saj77
Member
Member
Posts: 340
Joined: Sat Feb 02, 2019 8:08 am
Location: North East

Aftermarket 3rd brake light poor fit.

Post by saj77 » Tue Dec 03, 2019 5:26 pm

Mr roadster wrote: Tue Dec 03, 2019 5:17 pm Hi guys my third brake light disintegrated. Went to bmw dealership Stockton on tees Cleveland £97.00 so what did you guys pay.
I’ve ordered a spurious one hope it fits because I certainly don’t want to pay £97.00 incl vat :headbang:
For a clear one...
Item 122739985899 on eBay. £54:40. BMW Coventry
08 3.0 SI Roadster - Space Grey / Dream red, Eibachs & B4s, Z4M alignment

User avatar
oldgitdave
Senior Member
Senior Member
Posts: 1505
Joined: Sun Jul 30, 2017 8:47 pm
Location: Derbyshire

Aftermarket 3rd brake light poor fit.

Post by oldgitdave » Tue Dec 03, 2019 7:02 pm

saj77 wrote: Tue Dec 03, 2019 5:26 pm
Mr roadster wrote: Tue Dec 03, 2019 5:17 pm Hi guys my third brake light disintegrated. Went to bmw dealership Stockton on tees Cleveland £97.00 so what did you guys pay.
I’ve ordered a spurious one hope it fits because I certainly don’t want to pay £97.00 incl vat :headbang:
For a clear one...
Item 122739985899 on eBay. £54:40. BMW Coventry
I bought this one:
https://www.ebay.co.uk/itm/Genuine-BMW- ... 3717079258
A tad more than that but still reasonable 👍.
Zedless :(

Mr roadster
Member
Member
Posts: 203
Joined: Sun Sep 23, 2018 8:38 pm

Aftermarket 3rd brake light poor fit.

Post by Mr roadster » Tue Dec 03, 2019 7:14 pm

Thanks oldgitdave that’s a hell of a difference in price I thought all bmw dealers charged the same obviously not thanks again. I will ring them.i will keep spurious one for spare.

Post Reply