Does anyone need any clips, trim, connectors etc

bigredrob · Post by **bigredrob** » Thu Jun 13, 2019 11:26 am

Hi, do you speed yaw sensor part 34526769174, from under the drivers seat carpet?

adam1985 · Post by **adam1985** » Thu Jun 13, 2019 11:32 am

Hey do you have the oil sump hatch cover available, mine lost its screw so doesnt stay closed.
Number 4 from the pic below

: Capture.JPG (35 KiB) Viewed 721 times

adam1985 · Post by **adam1985** » Thu Jun 13, 2019 11:39 am

TheThingIs wrote: ↑Wed Jun 12, 2019 11:52 pm I'd be interested in the centre console lid...I broke the catch on mine so the damn thing won't stay shut
I'm also after a black leather passenger sun visor as the mirror is broken on mine. Happy to drive down and collect.

He is selling the sun visors here viewtopic.php?f=7&t=115350

Jamie25 · Post by **Jamie25** » Fri Jun 21, 2019 7:24 am

If they've not gone already I need two screw covers, one for behind door release lever, drivers side.
The second for the centre tunnel side wall, again drivers side, near the front of the seat. Parallel with the hazard warning switch.
Let me know posted cost.

parabolica · Post by **parabolica** » Fri Jun 21, 2019 3:07 pm

Hey OP, bit of a long shot but do you still have the micro switch that goes in the boot? Mine seems to have disappeared. Will take the whole plastic housing that screws into the boot wall if you’ve still got it.

synthedup · Post by **synthedup** » Fri Jun 21, 2019 3:11 pm

parabolica wrote: ↑Fri Jun 21, 2019 3:07 pm Hey OP, bit of a long shot but do you still have the micro switch that goes in the boot? Mine seems to have disappeared. Will take the whole plastic housing that screws into the boot wall if you’ve still got it.

Hi, I actually sold it but I believe the guy who bought it didn't need it in the end. Would you like me to get in touch with him?

Jembo · Post by **Jembo** » Fri Jun 21, 2019 3:15 pm

ibasniper wrote: ↑Sun Jun 09, 2019 6:24 pm I will take any centre console screws n covers please. Also under bonnet screws etc on front plastic cover around bonnet catch.
Let me know about ££
Cheers

2nd dibs on centre console plastic screw caps

ibasniper · Post by **ibasniper** » Fri Jun 21, 2019 4:12 pm

synthedup wrote: ↑Sun Jun 09, 2019 11:21 am Hi all,

I’m at the stage now where I will be scrapping the car shortly.

I still have loads of clips, plastic trim, connectors etc.

Does anyone need anything?

i need clips and fasteners for plastic panel that covers the radiator if you have them?

parabolica · Post by **parabolica** » Fri Jun 21, 2019 8:24 pm

synthedup wrote: ↑Fri Jun 21, 2019 3:11 pm
parabolica wrote: ↑Fri Jun 21, 2019 3:07 pm Hey OP, bit of a long shot but do you still have the micro switch that goes in the boot? Mine seems to have disappeared. Will take the whole plastic housing that screws into the boot wall if you’ve still got it.
Hi, I actually sold it but I believe the guy who bought it didn't need it in the end. Would you like me to get in touch with him?

If it’s not too much trouble - would be greatly appreciated!

bokus · Post by **bokus** » Sun Jun 23, 2019 10:34 pm

Hi, do you have the metal clip on piece that moves the air vent direction tab?

Thanks

Sandman77 · Post by **Sandman77** » Sun Jun 23, 2019 10:41 pm

Hi, do you have any of the plastic clips that hold the door cards on? A few of mine are bent/squashed/snapped.
Thanks

Chris_D · Post by **Chris_D** » Sun Jun 23, 2019 11:07 pm

synthedup wrote: ↑Sun Jun 09, 2019 11:21 am Hi all,

I’m at the stage now where I will be scrapping the car shortly.

I still have loads of clips, plastic trim, connectors etc.

Does anyone need anything?

Chris_D wrote: ↑Sun Jun 09, 2019 11:44 am I could do with the front bumper clips and any door card clips if u have them?
The airbag module arrived ok btw. Thx
Wish ida thought of clips before. *headslap*

Z4-forum.com

Z4-forum.com

FREE Does anyone need any clips, trim, connectors etc