Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Prop shaft nock
-
- Newbie
- Posts: 25
- Joined: Sat Dec 06, 2014 7:31 pm
Prop shaft nock
Afternoon all,
Just a quick question. I've the common clunck coming from what sounds like the gearbox/propshaft which is heard mainly when driving, not just changing gear at a standstill.
I've read somewhere in the past that it's quite a common noise with the grease on the propshaft? Specialised grease or something?
Wondering how much of a difficult job it is getting the propshaft off to do the work? I've had the exhaust off from the manifold back of late so shouldn't be too much hassle removing it which I'm guessing I will need too to gain access.
Any info would me much appreciated.
Cheers,
Lee.
Just a quick question. I've the common clunck coming from what sounds like the gearbox/propshaft which is heard mainly when driving, not just changing gear at a standstill.
I've read somewhere in the past that it's quite a common noise with the grease on the propshaft? Specialised grease or something?
Wondering how much of a difficult job it is getting the propshaft off to do the work? I've had the exhaust off from the manifold back of late so shouldn't be too much hassle removing it which I'm guessing I will need too to gain access.
Any info would me much appreciated.
Cheers,
Lee.
- buzyg
- Legend
- Posts: 26532
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
-
- Senior Member
- Posts: 1178
- Joined: Tue Mar 21, 2017 11:11 pm
- Location: North West
Prop shaft nock
Once the exhaust is off it's pretty much just the heatshield to remove I believe.
- skelters
- Senior Member
- Posts: 2640
- Joined: Thu Jun 14, 2007 11:18 pm
- Location: Greenock, Scotland
Prop shaft nock
Heard of this happening in the past on some cars. Quite possibly the Flex Disc.....
Driveshaft clunking when pulling away. Flex disc and cs bearing shot?
viewtopic.php?t=97640
BMW Giubo Flex Disc + Driveshaft + Transmission Mounts Install DIY
Driveshaft clunking when pulling away. Flex disc and cs bearing shot?
viewtopic.php?t=97640
BMW Giubo Flex Disc + Driveshaft + Transmission Mounts Install DIY
2007 Z4 3.0si Sport. Silver Grey Metallic, Brembo Brakes, HEL Braided Brake Hoses, Machine Monkey Exhaust Tips, Stubby, Piano Black trim, Black Leather, Bilstein B12-Pro-Kit, Michelin Pilot Sport 4 on MV2's. Roof Motor in the Boot!
- JamieZ4C
- Member
- Posts: 749
- Joined: Thu Mar 08, 2018 3:17 pm
- Location: Hampshire
Prop shaft nock
I have this "clunk" and I'm fairly sure it is quite common.
If it's the guibo or 'donut' you would normally get a clunk when selecting first gear from neutral (and perhaps reverse too). Mine doesn't do this and I know the previous owner replaced the guibo.
I can get mine to make the clunk if I blip the accelerator whilst pootling along in first or second not much above idle. It's a metallic clink/clunk coming from directly beneath/behind me and I believe it is where the prop enters the diff and indeed it just needs regreasing. The grease is 83230417754.
Hoping to get mine done this year. A member on here (Markos_Z4) had the same issue fixed and advised me it probably wasn't worth trying to DIY and to just pay a garage to do it. Of course, very good advice which I'll probably ignore
The good news is I don't think much harm is being done, it just doesn't sound great. Hope that helps and good luck diagnosing and fixing your clunk
If it's the guibo or 'donut' you would normally get a clunk when selecting first gear from neutral (and perhaps reverse too). Mine doesn't do this and I know the previous owner replaced the guibo.
I can get mine to make the clunk if I blip the accelerator whilst pootling along in first or second not much above idle. It's a metallic clink/clunk coming from directly beneath/behind me and I believe it is where the prop enters the diff and indeed it just needs regreasing. The grease is 83230417754.
Hoping to get mine done this year. A member on here (Markos_Z4) had the same issue fixed and advised me it probably wasn't worth trying to DIY and to just pay a garage to do it. Of course, very good advice which I'll probably ignore
The good news is I don't think much harm is being done, it just doesn't sound great. Hope that helps and good luck diagnosing and fixing your clunk
- Ewazix
- Lifer
- Posts: 4721
- Joined: Sun May 02, 2010 5:30 pm
- Location: Somerset
Prop shaft nock
2003 2.5 SE, low miles, Sterling Grey, 108's & Eagles, no stubby here! Unmolested.
2018 Cooper S Countryman
Fiesta Ecoboost
2018 Cooper S Countryman
Fiesta Ecoboost
- Chris_D
- Lifer
- Posts: 6615
- Joined: Thu Apr 21, 2016 11:41 pm
- Location: Mostly Holland. Sometimes UK.
Prop shaft nock
Ive yet to conclude that thread with fix followup.Ewazix wrote: ↑Fri Feb 08, 2019 5:29 pm An old thread worth reading
viewtopic.php?f=3&t=97640&start=15
I'll be tackling it when the warmer weather hits.
Hasnt given me any issue or concern since and as others say it sounds worse than it is.
E85 3.0i roadie (03) 'Benny'. E93 320d M-Sport Cabrio (11) 'Bob'.
'Always different, always the same.' John Peel on The Fall.
'Always different, always the same.' John Peel on The Fall.
- paddy wright
- Lifer
- Posts: 7664
- Joined: Sun Jan 06, 2008 1:00 pm
- Location: south yorkshire
Prop shaft nock
As said above it’s the prop shaft doughnut by the sounds of it.
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!
- MACK
- Lifer
- Posts: 3600
- Joined: Mon Jun 15, 2015 11:38 am
- Location: Manchester
Prop shaft nock
I had the propshaft clunk when I first got mine. I used the loctite grease/liquid metal on the splines and never had an issue since. However this sounds more like the doughnut is the issue, as the spines only really present when selecting first/reverse from stationary, not on the move.
Silver 05 3.0i SE
Mods inc - F/L Xenons Clear Ind Rear Lights M Sport Seats & Wheel Eibach/B4 3.64 DIFF (SOLD)
White E89 20i M Sport
Mods inc- B12 kit, M3 Arms, 18" Zito 935's with PS4's, Decat & Remap, Switchable Exhaust Flap (SOLD)
Mods inc - F/L Xenons Clear Ind Rear Lights M Sport Seats & Wheel Eibach/B4 3.64 DIFF (SOLD)
White E89 20i M Sport
Mods inc- B12 kit, M3 Arms, 18" Zito 935's with PS4's, Decat & Remap, Switchable Exhaust Flap (SOLD)
-
- Newbie
- Posts: 25
- Joined: Sat Dec 06, 2014 7:31 pm
Prop shaft nock
That's brilliant,
Thanks for the replies guys. I'll look at doing the splines and the doughnut and order them next week.
Might as well so them both while I'm at it.
I'll update upon completion or if I find anything else that's causing the noise. Hopefully it's nothing to do with the gear box itself.
Cheers again,
Lee
Thanks for the replies guys. I'll look at doing the splines and the doughnut and order them next week.
Might as well so them both while I'm at it.
I'll update upon completion or if I find anything else that's causing the noise. Hopefully it's nothing to do with the gear box itself.
Cheers again,
Lee